Application of exergy destruction minimization in convective heat transfer optimization for elliptical tube

WANG Junbo; XIE Pan; LIU Zhichun; LIU Wei

doi:10.11949/j.issn.0438-1157.20160544

您当前的位置：

首页 >

文章列表页 >

Application of exergy destruction minimization in convective heat transfer optimization for elliptical tube

更新时间：2025-12-10

- Application of exergy destruction minimization in convective heat transfer optimization for elliptical tube
- CIESC Journal Issue S1, Pages: 307-311(2016)
- 作者机构：
  
  华中科技大学能源与动力工程学院,湖北,武汉,430074
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20160544
  CLC： K124
- Online First：31 August 2016，
  
  Published：31 August 2016
- 稿件说明：
移动端阅览
WANG Junbo, XIE Pan, LIU Zhichun, et al. Application of exergy destruction minimization in convective heat transfer optimization for elliptical tube[J]. CIESC Journal, 2016, (S1): 307-311.
DOI：

WANG Junbo, XIE Pan, LIU Zhichun, et al. Application of exergy destruction minimization in convective heat transfer optimization for elliptical tube[J]. CIESC Journal, 2016, (S1): 307-311. DOI： 10.11949/j.issn.0438-1157.20160544.

摘要

在流体对流换热分析的基础上得到局部?损率的表达式，以局部?损率为优化目标，满足能量与质量守恒条件，在流动功耗为定值条件下，根据拉格朗日泛函极值原理得到?损为极值时的控制方程组，发展了最小?损优化方法。将该方法应用到椭圆换热单管中，得到优化后的速度场与温度场。优化结果表明，优化流动结构为纵向旋流，具有较好的传热及流动性能，相比未优化椭圆管综合换热性能（Nu/Nus）/（f/fs）可达3.21，同时得到了纵向涡在流场中的分布情况，这对椭圆管内强化换热发展具有指导意义。

Abstract

The expression of local exergy destruction rate is deduced on the analysis of convective heat transfer. Lagrange function is constructed with local exergy destruction rate set as optimization objective and prescribe flow power consumption as constraint condition. Besides

energy and mass conservation laws are taken into consideration in this Lagrange function. By taking variation on the Lagrange function

optimization equations are obtained. Through numerical simulation

the optimization equations are solved in the convective heat transfer for elliptical tube flow and the optimized velocity and temperature fields are obtained. The results show that the optimum flow structure in the elliptical tube is longitudinal swirl flow with multi-vortexes. Compared with the elliptical tube with general governing equations (Navier-Stokes equations)

the optimized flow has a good heat transfer rate with low increase of flow resistance and the comprehensive performance

(Nu/Nus)/(f/fs)

is 3.21. Furthermore

the distribution of vortexes in the elliptical tube is also obtained which is significant to improve the design of elliptical tubes.

关键词

Keywords

references

Views

344

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Numerical simulation and field synergy optimization of brick-built heat exchange chamber in zinc refining furnace

Effects of electrolyte flow rate and current density on the output performance of seawater-activated batteries

Study on performance of serrated spiral finned tube banks under wet flue gas condition

Effects of tube bundle structure on heat transfer and resistance characteristics of slit finned elliptical tube heat exchangers

Effect of height of winglet vortex generators on thermal hydrodynamic performance of tube bank fin heat exchanger

Related Author

HUANG Zhengzong

LIU Kecheng

LI Zefang

ZENG Pingsheng

LIU YongFu

YAN Hongjie

LIU Liu

CHEN Peiqiang

Related Institution

School of Energy Science and Engineering, Central South University

Shenzhen Zhongjin Lingnan Nonfemet Company Limited Shaoguan Smelter

College of Power and Energy Engineering, Harbin Engineering University

Institute of Systems Engineering, Academy of Military Sciences

State Key Laboratory of Clean Energy Utilization, Zhejiang University

⁰