Performance comparison of self-pumping and spiral groove mechanical seals

LU Jianhua; SUN Jianjun; CHEN Wei; MA Chenbo; YAN Yan

doi:10.11949/j.issn.0438-1157.20160419

您当前的位置：

首页 >

文章列表页 >

Performance comparison of self-pumping and spiral groove mechanical seals

更新时间：2025-11-26

- Performance comparison of self-pumping and spiral groove mechanical seals
- CIESC Journal Vol. 67, Issue 10, Pages: 4370-4377(2016)
- 作者机构：
  
  1. 南京林业大学机械电子工程学院,江苏,南京,210037
  2. 扬州秋源压力容器制造有限公司,江苏,扬州,225115
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20160419
  CLC： H136
- Online First：05 October 2016，
  
  Published：05 October 2016
- 稿件说明：
移动端阅览
LU Jianhua, SUN Jianjun, CHEN Wei, et al. Performance comparison of self-pumping and spiral groove mechanical seals[J]. CIESC Journal, 2016, 67(10): 4370-4377.
DOI：

LU Jianhua, SUN Jianjun, CHEN Wei, et al. Performance comparison of self-pumping and spiral groove mechanical seals[J]. CIESC Journal, 2016, 67(10): 4370-4377. DOI： 10.11949/j.issn.0438-1157.20160419.

摘要

运用Fluent软件对泵入式自泵送机械密封与螺旋槽流体动压型机械密封进行三维流场动力学仿真分析，比较研究了两种流体动压型机械密封在不同几何参数和操作条件下的端面开启力和泄漏率。结果表明：在相同的结构和操作条件下，螺旋槽机械密封的动压效应和泄漏率均大于自泵送机械密封的相应值，其开启力与泄漏率的比值小于自泵送机械密封的相应值的比值；端面结构参数和转速对螺旋槽机械密封的开启力和泄漏率影响显著，对自泵送机械密封影响不明显。螺旋槽机械密封比自泵送机械密封在性能上具有更高的尺寸依赖性。

Abstract

3D flow field dynamics of two hydrodynamic mechanical seals of self-pumping and spiral groove

which were based on "pumping in" principle

were simulated by Fluent software. Sealing properties of opening force and leakage rate were compared on these two seals at various structural and operating parameters. The numerical simulation results showed that

at the same structure and operating condition

the spiral groove mechanical seal had higher hydrodynamic effect and leakage rate but lower ratio of opening force over leakage rate than self-pumping mechanical seal. In terms of seal performance of opening force and leakage rate

the impact of both transverse structure parameters and rotating speed were significant to spiral groove mechanical seal but insignificant to self-pumping mechanical seal. The performance of hydrodynamic mechanical seals is more dependent on dimensions for spiral groove mechanical seal than for self-pumping mechanical seal.

关键词

Keywords

references

Views

273

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Performance analysis on diffuser self-pumping hydrodynamic and hydrostatic mechanical seal

Numerical simulation of dynamic process during outside-in dead-end filtration in hollow fiber membrane module

Study on influence of jet flow on slurry transport characteristics in slurry chamber of shield tunneling machines

Local deposition characteristics of CaCO3 fouling under different roughness element structures

Electrolyte flow characteristics of seawater activated battery

Related Author

Cheng GE

Jianjun SUN

Xuchen SU

Chenbo MA

Qiuping YU

ZHUANG Liwei

DAI Gance

SUN Jiuchun

Related Institution

College of Mechanical and Electrical Engineering, Nanjing Forestry University

State Key Laboratory of Chemical Engineering, East China University of Science and Technology

Shanghai Tengchuang Shuzhi Engineering Technology Consulting Co., Ltd.

Tengda Construction Co., Ltd.

Zhejiang Key Laboratory of Multiflow and Fluid Machinery, Zhejiang Sci-Tech University

⁰