Liquid flow characteristics of structured corrugation SiC-foam packing sheets

LIU Qiaoyu; LI Hong; GAO Xin; LI Xingang

doi:10.11949/j.issn.0438-1157.20160329

您当前的位置：

首页 >

文章列表页 >

Liquid flow characteristics of structured corrugation SiC-foam packing sheets

更新时间：2025-12-10

- Liquid flow characteristics of structured corrugation SiC-foam packing sheets
- CIESC Journal Issue 8, Pages: 3340-3346(2016)
- 作者机构：
  
  1. 天津大学化工学院,天津,300072
  2. 精馏技术国家工程研究中心,天津,300072
  3. 天津化学化工协同创新中心,天津,300072
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20160329
  CLC： Q02
- Online First：05 August 2016，
  
  Published：05 August 2016
- 稿件说明：
移动端阅览
LIU Qiaoyu, LI Hong, GAO Xin, et al. Liquid flow characteristics of structured corrugation SiC-foam packing sheets[J]. CIESC Journal, 2016, (8): 3340-3346.
DOI：

LIU Qiaoyu, LI Hong, GAO Xin, et al. Liquid flow characteristics of structured corrugation SiC-foam packing sheets[J]. CIESC Journal, 2016, (8): 3340-3346. DOI： 10.11949/j.issn.0438-1157.20160329.

摘要

通过采用配备微距镜头的高速摄像仪记录单波纹片上的液体流动行为，发现了泡沫碳化硅波纹规整填料内同时存在液膜流动和准壁流两种液体流动模式。同时测定了组合波纹片之间的液体传递量，并将泡沫碳化硅波纹规整填料与金属丝网波纹填料和金属板波纹规整填料的测试结果进行比较，结果表明泡沫碳化硅波纹规整填料的单波纹片上的液体扩散程度较大，组合波纹片之间的液体传递量高于金属丝网波纹填料和金属板波纹规整填料。研究结果揭示了泡沫碳化硅波纹规整填料具有高效传质特性的根本原因在于其独特的三维空间网孔结构增强了液体在单波纹片上的横向扩散能力和在组合波纹片之间的径向传递能力，为新型高效规整填料的机理研究和进一步开发开拓了思路。

Abstract

The microscopic liquid flow characteristics of the structured corrugation foam packing (SCFP) sheets with different combinations of the pore size and the extrusion ratio are observed experimentally in this paper. The tracks of liquid water under different flow rates were recorded by a high-speed camera with a micro lens. A combination of liquid film and quasi-wall flow is verified as the unique liquid flow pattern in SCFP sheets. Besides

the study on the liquid transportation of combined SCFP sheets is carried out. Furthermore

the liquid flow characteristics of SCFP sheets are compared with two classical packing sheets widely used in distillation. The comparison results demonstrate that the unique three-dimensional network structure of SiC skeleton makes SCFP sheets realize larger liquid dispersion degree for single corrugated sheet and better liquid transportation capability for combined corrugated sheets. The study suggests that SiC-foam material has a broad application prospect in the field of structured packing.

关键词

Keywords

references

Views

162

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Effects of industrial catalyst structure on methanol to aromatics in a packed bed reactor

Pore-scale simulation of heat transfer and pressure drop performance in Laguerre-Voronoi open-cell foams

Life cycle cost evaluation of structured corrugation SiC-foam packing

Influence of structure on drainage performance of metal foam

Numerical analysis of fluid flow and heat transfer in various composite packed beds

Related Author

XIE Qinqin

WENG Junqi

LIN Zhenli

YE Guanghua

ZHOU Xinggui

WANG Xiaoyu

DAI Guilong

DENG Shukun

Related Institution

State Key Laboratory of Chemical Engineering and Low-carbon Technology, East China University of Science and Technology

Key Laboratory of New Energy and Energy-saving in Building, Fujian University of Technology

Fuzhou Green Chemical and Cleaner Production Industry Technology Innovation Center, Fujian University of Technology

School of Chemical Engineering and Technology, Tianjin University

Institute of Refrigeration & Cryogenics Engineering, Shanghai Jiao Tong University

⁰