such as pharmaceutical and personal care products (PPCPs) and metal nanoparticles (NPs) coexist in environment
their physical-chemical properties might be changed under the interaction process
which would result in their combined toxicity different from the single one. After the interactions of tetracycline and copper nanoparticles (CuNPs)
triclosan and CuNPs in aqueous solution
and their physical-chemical property changes were investigated. The results indicated that the concentration of tetracycline decreasing mainly because of its degradation caused by CuNPs
and the adsorption of triclosan on CuNPs resulted in the triclosan concentration declining. In addition
the amount of dissolved Cu2+ from CuNPs was significantly increased probably due to its surface property change caused by tetracycline and triclosan. Thus
both the PPCPs and NPs had physical-chemical property changes in different type and various degrees under the interaction process.
Controlling factors of excess sludge on adsorbing trace typical pharmaceuticals
p-Nitrophenol removal using soil aquifer treatment system
Research progress on removal of micro/nanoplastics by metal-based composite nanomaterials
Adaptive modeling of simulated moving bed based on KELM-ANFIS
The analysis of energy efficiency for TVSA-based direct air capture system
Related Author
CAO Daqi
WANG Zhen
HAO Xiaodi
WANG Qunhui
ZHANG Xi
WEN Yujuan
YANG Yuesuo
DU Xinqiang
Related Institution
Sino-Dutch R & D Centre for Future Wastewater Treatment Technologies/Key Laboratory of Urban Stormwater System and Water Environment, Ministry of Education, Beijing University of Civil Engineering and Architecture
School of Civil and Environmental Engineering, University of Science and Technology Beijing
Key Laboratory of Groundwater Resources and Environment, Ministry of Education, Jilin University
Key Laboratory of Regional Environment & Eco-remediation, Ministry of Education, Shenyang University
School of Resource and Environment, Hunan University of Technology and Business