Effect of curvature and undercooling degree of surface on behavior of droplet spreading

FAN Yao; WANG Hong; ZHU Xun; HUANG Geyong; DING Yudong; LIAO Qiang

doi:10.11949/j.issn.0438-1157.20160224

您当前的位置：

首页 >

文章列表页 >

Effect of curvature and undercooling degree of surface on behavior of droplet spreading

更新时间：2025-11-26

- Effect of curvature and undercooling degree of surface on behavior of droplet spreading
- CIESC Journal Issue 7, Pages: 2709-2717(2016)
- 作者机构：
  
  1. 重庆大学工程热物理研究所,重庆,400030
  2. 低品位能源利用技术及系统教育部重点实验室(重庆大学),重庆,400030
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20160224
  CLC： Q028.8
- Online First：05 July 2016，
  
  Published：05 July 2016
- 稿件说明：
移动端阅览
FAN Yao, WANG Hong, ZHU Xun, et al. Effect of curvature and undercooling degree of surface on behavior of droplet spreading[J]. CIESC Journal, 2016, (7): 2709-2717.
DOI：

FAN Yao, WANG Hong, ZHU Xun, et al. Effect of curvature and undercooling degree of surface on behavior of droplet spreading[J]. CIESC Journal, 2016, (7): 2709-2717. DOI： 10.11949/j.issn.0438-1157.20160224.

摘要

从覆冰类型及危害来看，雨凇对于导线产生的危害是最为严重和致命的。液滴撞击壁面的动力学特性对于相变凝固过程中的热质传递有重要影响，进而影响导线覆冰的特性。通过对比液滴撞击常温及过冷弯曲壁面过程中的液滴行为演变的异同，获得了表面过冷度和曲率大小对液滴铺展行为的影响规律。实验结果表明，随着圆柱曲面曲率的增加，周向上液膜铺展更好，轴向上液膜铺展更差。对于低温壁面上液滴的铺展过程，增加表面的过冷度，液滴的铺展更差，液滴振荡弛豫时间更短，表层液膜结冰速率加快。然而，低温壁面上液滴的铺展好于常温壁面上液滴的铺展，通过分析温度对液滴表面张力和黏性的影响规律，推论在铺展过程中，较低的壁面温度使得液滴底层快速形成了一层冰膜，改变了液固之间的界面能，使得液滴更易于铺展。在液滴回缩阶段，可明显观察到底层结冰的现象。该结论可为导线雨凇结冰提供理论参考。

Abstract

To considerate the harmness and the icing type of the power transmission line

the glaze was the most deadly harmness to the power transmission line than the other icing types. Dynamic characteristics of droplets impacting on the solid surface has a significant effect on the mechanism of heat and mass transfer during the phase transformation as well as the mechanism of the conductor ice coating. The evolution behaviors of droplets impacting on the different temperature curved surfaces were investigated by the visional experiments. It showed that the effects of the different undercooling degree and the surface curvature on the law of droplet spreading behavior. The results indicated that the circumferential liquid film spread out better and the axial one did worse with the increase of cylindrical surface curvature. Increasing the surface undercooling degree

the droplet spread worse and oscillation time became shorter and the upper film freeze faster on the undercooling surface. However

the droplet impacting on undercooling surface spread better than that at ambient temperature. It was speculated that there was an ice film formed rapidly at the bottom of the droplet when it spread on the cold solid surface by analyzing the effects of the surface tension and viscosity of water droplet on the spread behavior. The ice film

which obviously altered the interface energy between the solid phase and liquid phase

made the droplet spread easily. The ice film was distinctly observed at the droplet recoiling stage. The conclusion can provide theoretical reference for glaze ice on the conductors.

关键词

Keywords

references

Views

421

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research on solidification characteristics of particles formed by dropping molten polyethylene glycol into oil pool

Numerical study on spreading characteristics of droplet impact on single fiber

Study on flash evaporation characteristics as well as thermodynamic variation performance in liquid hydrogen tank during on-orbit venting

Performance study of gas-liquid vortex separators under low cross-sectional gas velocity

Zn-doped PdO/ZrO2 with rich oxygen vacancies for the synthesis of diphenyl carbonate from CO2 and phenol

Related Author

ZHENG Zhangjing

YANG Qingyun

YAN Shixing

SHI Yuchen

XU Yang

HUANG Bin

FENG Shengjie

FU Cheng

Related Institution

School of Low-carbon Energy and Power Engineering, China University of Mining and Technology

School of Petroleum and Natural Gas Engineering, Chongqing University of Science and Technology

School of Petroleum Engineering, Northeast Petroleum University

School of Petroleum Engineering, Northeast Petroleum University, Daging

Department of Refrigeration and Cryogenic Engineering, Xi’an Jiaotong University

⁰