Numerical simulation of multi-flow and heat transfer characteristics in heat exchangers with triple-helical baffles

DUAN Zhenya; SHEN Feng; ZHANG Junmei; SONG Xiaomin; CAO Xing

doi:10.11949/j.issn.0438-1157.20160215

您当前的位置：

首页 >

文章列表页 >

Numerical simulation of multi-flow and heat transfer characteristics in heat exchangers with triple-helical baffles

更新时间：2025-12-10

- Numerical simulation of multi-flow and heat transfer characteristics in heat exchangers with triple-helical baffles
- CIESC Journal Issue S1, Pages: 232-238(2016)
- 作者机构：
  
  青岛科技大学机电工程学院,山东,青岛,266000
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20160215
  CLC： K124
- Online First：31 August 2016，
  
  Published：31 August 2016
- 稿件说明：
移动端阅览
DUAN Zhenya, SHEN Feng, ZHANG Junmei, et al. Numerical simulation of multi-flow and heat transfer characteristics in heat exchangers with triple-helical baffles[J]. CIESC Journal, 2016, (S1): 232-238.
DOI：

DUAN Zhenya, SHEN Feng, ZHANG Junmei, et al. Numerical simulation of multi-flow and heat transfer characteristics in heat exchangers with triple-helical baffles[J]. CIESC Journal, 2016, (S1): 232-238. DOI： 10.11949/j.issn.0438-1157.20160215.

摘要

为了增加大螺旋角下单位长度换热管上螺旋折流板数量提高换热，提出三螺旋折流板导流结构，对设置三螺旋折流板后壳程流体的流动与传热进行了数值模拟，重点考察了Reynolds数Re=1391～4174时的壳程压降及对流传热系数，与设置单螺旋折流板的对比结果表明：三螺旋折流板换热器壳程对流传热系数高27.9%，JF因子高13.67%，综合传热性能更好。在此基础上运用耗散理论分析了三螺旋折流板采取不同螺旋角时对换热效率的影响，发现由传热引起的耗散率随Reynolds数变化规律与壳程对流传热系数随Reynolds数的变化规律类似，相同流量条件下螺旋角为64.8°的换热器耗散率最小。另外，中心换热管与壳壁附近换热管的传热系数比较结果显示，中心管热交换量均低于壳壁附近换热管热交换量。

Abstract

Triple helical baffle heat exchanger was proposed to arrange more helical baffle in shell side with large helix angle and enhance heat transfer rate. In this paper

the flow characteristics and heat transfer performance of heat exchangers with triple helical baffles were analyzed. The comprehensive performance between single-helical and triple-helical baffle heat exchangers were compared based on the calculating results of pressure drop and heat transfer coefficient when Reynolds number ranges from 1391-4174. The results showed that:heat transfer coefficient and JF factor of triple-helical baffle heat exchangers is 27.9% higher and 13.67% higher than single-helical baffle heat exchanger respectively. Besides entransy dissipation theory was used to analyze the heat transfer performance of triple-helical baffle heat exchanger with different helix angle

and triple-helical baffle with 64.8° got the lowest entransy dissipation rate. The heat transfer rate of central tube and outer tube were compared

outer tube have higher heat transfer rate compared with central tube.

关键词

Keywords

references

Views

248

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research on topology optimization of microchannel based on field synergy and entransy dissipation

A new method of numerical design for flat tube fin heat exchanger

A new type of liquid-suction heat exchanger for automotive air conditioning system

Numerical simulation on shell side fluid flow and heat transfer in heat exchanger with trefoil-baffles

Analysis of flow field characteristics and mixing performance of different SK-type static mixers

Related Author

LIU Wenzhu

YUN Heming

WANG Baoxue

HU Mingzhe

ZHONG Chonglong

Bingshan MA

Haochen ZHAO

Ye WANG

Related Institution

School of Thermal Energy Engineering, Shandong Jianzhu University

School of Environmental and Municipal Engineering, Lanzhou Jiaotong University

School of Civil Engineering, Lanzhou University of Technology

Shanghai Marine Equipment Research Institute

Key Laboratory of Thermo-Fluid Science and Engineering, Ministry of Education, School of Energy and Power Engineering, Xi'an Jiaotong University

⁰