Numerical simulation of dynamic process during outside-in dead-end filtration in hollow fiber membrane module

ZHUANG Liwei; DAI Gance

doi:10.11949/j.issn.0438-1157.20160088

您当前的位置：

首页 >

文章列表页 >

Numerical simulation of dynamic process during outside-in dead-end filtration in hollow fiber membrane module

更新时间：2025-11-26

- Numerical simulation of dynamic process during outside-in dead-end filtration in hollow fiber membrane module
- CIESC Journal Issue 7, Pages: 2841-2850(2016)
- 作者机构：
  
  华东理工大学化学工程联合国家重点实验室,上海,200237
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20160088
  CLC： P273
- Online First：05 July 2016，
  
  Published：05 July 2016
- 稿件说明：
移动端阅览
ZHUANG Liwei, DAI Gance. Numerical simulation of dynamic process during outside-in dead-end filtration in hollow fiber membrane module[J]. CIESC Journal, 2016, (7): 2841-2850.
DOI：

ZHUANG Liwei, DAI Gance. Numerical simulation of dynamic process during outside-in dead-end filtration in hollow fiber membrane module[J]. CIESC Journal, 2016, (7): 2841-2850. DOI： 10.11949/j.issn.0438-1157.20160088.

摘要

建立了中空纤维膜外压式全量过滤的CFD模型，模拟膜丝长度、直径、渗透系数、装填密度、污染指数以及跨膜压差不同条件，得到通量分布和产水量的动态演变过程。研究结果表明：通量分布会随着过滤的进行而逐渐变得均匀，这种通量分布的自我调节作用在膜丝较长、较细，渗透性较好，装填密度较高，污染指数较高以及跨膜压差较高时更为明显；产水流量的倒数与累积产水量呈线性关系，但由于通量分布不均匀并且均匀性演变，这种线性关系区别于传统滤饼过滤模型；通过数据拟合得到了适用于中空纤维外压式全量操作的滤饼过滤关联式，可用于预测组件的性能和指导组件的设计。

Abstract

A CFD model was developed based on the filtration in the dead-end outside-in hollow fiber membrane module. Various fiber length

diameter

permeability

packing density

fouling index and transmembrane pressure were chosen during numerical simulation of the dynamic evolution of flux distribution and permeate volumetric flow rate. The simulation revealed that the uniformity of flux distribution improved as the filtration processes. The self-adjustment of the flux distribution was more pronounced with longer

narrower

more permeable fibers

higher packing density

fouling index and trans-membrane pressure. The inverse of the water volumetric flow rate increased linearly with the accumulated volume of the permeate. Due to the non-uniformity of the flux distribution and its dynamic evolution

the linear relationship differed from the one presented in the classic cake filtration model. A correlation equation to characterize the dead-end outside-in cake filtration in the hollow fiber membrane module was obtained through curve fitting of the simulation data. The equation enabled the prediction of the module performance and better design of the module.

关键词

Keywords

references

Views

353

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Performance comparison of self-pumping and spiral groove mechanical seals

Study on influence of jet flow on slurry transport characteristics in slurry chamber of shield tunneling machines

Local deposition characteristics of CaCO3 fouling under different roughness element structures

Electrolyte flow characteristics of seawater activated battery

Study on coupling operation characteristics of Stirling engine and high temperature heat pipe

Related Author

LU Jianhua

SUN Jianjun

CHEN Wei

MA Chenbo

YAN Yan

SUN Jiuchun

SANG Yunlong

WANG Haitao

Related Institution

School of Mechanical and Electrical Engineering, Nanjing Forestry University

Yangzhou Qiu Yuan Pressure Vessel Manufacturing Limited Company

Shanghai Tengchuang Shuzhi Engineering Technology Consulting Co., Ltd.

Tengda Construction Co., Ltd.

Zhejiang Key Laboratory of Multiflow and Fluid Machinery, Zhejiang Sci-Tech University

⁰