Development and adsorption properties of diatomite-LiCl composite desiccant

ZHENG Xu; WANG Ruzhu; GE Tianshu

doi:10.11949/j.issn.0438-1157.20160048

您当前的位置：

首页 >

文章列表页 >

Development and adsorption properties of diatomite-LiCl composite desiccant

更新时间：2025-11-26

- Development and adsorption properties of diatomite-LiCl composite desiccant
- CIESC Journal Issue 7, Pages: 2874-2879(2016)
- 作者机构：
  
  上海交通大学制冷与低温工程研究所,上海,200240
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20160048
  CLC： P172
- Online First：05 July 2016，
  
  Published：05 July 2016
- 稿件说明：
移动端阅览
ZHENG Xu, WANG Ruzhu, GE Tianshu. Development and adsorption properties of diatomite-LiCl composite desiccant[J]. CIESC Journal, 2016, (7): 2874-2879.
DOI：

ZHENG Xu, WANG Ruzhu, GE Tianshu. Development and adsorption properties of diatomite-LiCl composite desiccant[J]. CIESC Journal, 2016, (7): 2874-2879. DOI： 10.11949/j.issn.0438-1157.20160048.

摘要

以硅藻为多孔基质，氯化锂为浸渍盐，配制了硅藻-氯化锂复合除湿剂。采用麦克公司生产的ASAP2020物理吸附仪测量了复合硅藻的比表面积、孔径等微观结构参数。通过对吸附仪的改进，对复合除湿剂的水蒸气吸附性能进行了测试研究，并与纯硅藻基质以及常见硅胶除湿剂的吸附性能进行对比。氮气吸附测试显示复合除湿剂的比表面积、孔体积参数较纯硅藻基质有明显下降，表明氯化锂颗粒充分浸入到硅藻孔隙中。水蒸气吸附测试表明复合硅藻除湿剂的吸湿性能较纯硅藻基质及硅胶除湿剂有着显著提高。此外，基于Polanyi吸附势理论对复合除湿剂吸附特征曲线的拟合研究发现复合除湿剂的吸附特征曲线包括3个部分。

Abstract

Diatomite-LiCl composite desiccant was fabricated by impregnating LiCl into pores of porous diatomite. The surface area and pore parameters of composite desiccant were measured by Micromeritics gas adsorption analyzer (ASAP 2020). With improvement of the analyzer

water sorption capacity of composite desiccant was tested and compared to pure diatomite and conventional silica gel. Researches on nitrogen adsorption suggested that due to the impregnated salt particles

the surface area and pore volume of composite desiccant were smaller than pure porous media. Water sorption tests showed that the composite sample had water uptake much higher than that of pure diatomite and silica gel. Besides

sorption characteristic curves were fitted based on Polanyi potential theory. The result showed that the curve of composite desiccant could be divided into three sections.

关键词

Keywords

references

Views

321

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Preparation of carbon based porous adsorbent with ultra high specific surface area and its Kr gas storage performance

Cooling system for deep well drilling equipment based on adsorption cold storage technology

Heat storage performance of composite adsorbent with activated carbon fiber

Recent advances in high value added reuse of waste polystyrene in environment and energy

Simulation of flow field in vertical radial flow adsorber with parallel connection device

Related Author

TANG Yufeng

TAO Chunhui

WANG Yongzheng

LI Yinhui

DUAN Ran

ZHAO Zeyi

MA Heping

WU Zihang

Related Institution

School of Chemical Engineering and Technology, Xi’an Jiaotong University

Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University

Hangzhou City University

School of Mechanical Engineering, Shanghai Jiao Tong University

School of Electrical and Power Engineering, China University of Mining and Technology

⁰