Parallel algorithm of CFD-DEM model and applications on gas-solids flow in fluidized beds

YANG Chunzhen; CHEN Chengmin; LIU Guangxia; DUAN Yufeng

doi:10.11949/j.issn.0438-1157.20160026

您当前的位置：

首页 >

文章列表页 >

Parallel algorithm of CFD-DEM model and applications on gas-solids flow in fluidized beds

更新时间：2025-11-26

- Parallel algorithm of CFD-DEM model and applications on gas-solids flow in fluidized beds
- CIESC Journal Issue 7, Pages: 2748-2755(2016)
- 作者机构：
  
  1. 山东省科学院能源研究所,山东,济南,250014
  2. 东南大学能源与环境学院能源热转换及其过程测控教育部重点实验室,江苏,南京,210096
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20160026
  CLC： K1
- Online First：05 July 2016，
  
  Published：05 July 2016
- 稿件说明：
移动端阅览
YANG Chunzhen, CHEN Chengmin, LIU Guangxia, et al. Parallel algorithm of CFD-DEM model and applications on gas-solids flow in fluidized beds[J]. CIESC Journal, 2016, (7): 2748-2755.
DOI：

YANG Chunzhen, CHEN Chengmin, LIU Guangxia, et al. Parallel algorithm of CFD-DEM model and applications on gas-solids flow in fluidized beds[J]. CIESC Journal, 2016, (7): 2748-2755. DOI： 10.11949/j.issn.0438-1157.20160026.

摘要

提出广义区域覆盖法用于定位计算节点区域，利用Fluent软件的UDFs实现颗粒信息在计算节点间高效、准确地传递，建立了适用于非正交网格的CFD-DEM模型并行求解方法，在探讨并行模型计算效率的基础上对埋管流化床和单孔射流流化床内的气泡行为及双支腿流化床半床间的颗粒交换行为进行了数值模拟研究并对比实验结果。结果表明：CFD-DEM模型并行求解方法能够快速传递及收集计算节点内的颗粒信息；广义区域覆盖法降低了颗粒在计算节点内的定位时间，提高了模型的并行计算效率；能够捕获与Rong等一致的埋管周围气泡行为（其频率约为3 Hz），获得了与Bokkers等结果接近的单孔射流气泡尺寸及颗粒速度矢量分布，双支腿流化床半床间颗粒交换行为与实验结果一致，第一主频约为1 Hz，第二主频大于2 Hz。

Abstract

General domain coverage method (GDCM) was proposed to determine the region for each computing node efficiently by comparing all cell nodes

where these regions were helpful for Host to identify which computing node solid particle belongs to. Particle information was passed among host and nodes with the help of Fluent UDFs. The parallel algorithm for CFD-DEM model was developed successfully to simulate gas-solids flows in the fluidized beds (FBs) which were meshed in arbitrary shapes. Based on the comparison of calculation efficiency between parallel algorithm and serial algorithm

the bubble behaviors were studied in a FB with an immersed tube in a single jet FB

and the solids exchange behaviors between two half beds were simulated and compared with experimental results in a dual leg FB. The simulation results showed that the particle information was passed between host and nodes efficiently by parallel algorithm. It was efficient for GDCM to determine which computing node particles are in. The simulated bubbling frequency (about 3 Hz) was similar as Rong's simulation result. Compared with Bokkers' simulated and experimental jetting bubble size

the more similar bubble size and solid velocity vectors around the bubble were obtained by the parallel algorithm. The solid exchange between two half beds in both forms of the first (~1 Hz) and second (>2 Hz) domain frequency was simulated

which was similar as the experimental result.

关键词

Keywords

references

Views

469

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Investigation on flow characteristics of wet particles with power-law liquid-solid drag models in fluidized bed

Numerical simulation of residence time distribution in multi-chamber fluidized bed with continuous feeding

Numerical study on heat and mass transfer characteristics of particle coating in a spray fluidized bed with draft plates

Identification of gas-liquid two-phase flow patterns in a riser based on recursive characteristics and CNN

Zn-doped PdO/ZrO2 with rich oxygen vacancies for the synthesis of diphenyl carbonate from CO2 and phenol

Related Author

YUAN Zihan

WANG Shuyan

SHAO Baoli

XIE Lei

CHEN Xi

MA Yimei

Ruichao TIAN

Shuyan WANG

Related Institution

School of Petroleum Engineering, Northeast Petroleum University

School of Chemical Engineering and Technology, Xi’an Jiaotong University

School of Energy Science and Engineering, Harbin Institute of Technology

Zhengzhou Research Institute, Harbin Institute of Technology

Heilongjiang Key Laboratory of New Energy Storage Materials and Processes

⁰