Numerical simulation of gas-liquid flow in stirred tanks based on EMMS model

XIAO Qi; YANG Ning

doi:10.11949/j.issn.0438-1157.20160006

您当前的位置：

首页 >

文章列表页 >

Numerical simulation of gas-liquid flow in stirred tanks based on EMMS model

更新时间：2025-11-26

- Numerical simulation of gas-liquid flow in stirred tanks based on EMMS model
- CIESC Journal Issue 7, Pages: 2732-2739(2016)
- 作者机构：
  
  1. 武汉第二船舶设计研究院核动力舰船蒸汽动力系统国防科技实验室,湖北,武汉,430064
  2. 中国科学院过程工程研究所多相复杂系统国家重点实验室,北京,100190
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20160006
  CLC： Q051.7
- Online First：05 July 2016，
  
  Published：05 July 2016
- 稿件说明：
移动端阅览
XIAO Qi, YANG Ning. Numerical simulation of gas-liquid flow in stirred tanks based on EMMS model[J]. CIESC Journal, 2016, (7): 2732-2739.
DOI：

XIAO Qi, YANG Ning. Numerical simulation of gas-liquid flow in stirred tanks based on EMMS model[J]. CIESC Journal, 2016, (7): 2732-2739. DOI： 10.11949/j.issn.0438-1157.20160006.

摘要

采用欧拉-欧拉模型对搅拌釜内气液两相流进行了三维CFD模拟，重点研究了采用不同曳力模型时CFD模拟对搅拌桨附近排出流区两相流动的预测能力。模拟结果表明CFD能准确地预测排出流区的液相速度分布，但采用传统的Schiller-Naumann曳力一定程度上低估了排出流区的气液相间曳力，导致在完全扩散区CFD预测的分布器和桨叶下方区域气含率偏小，而基于气液非均匀结构和能量最小多尺度（EMMS）方法得到的DBS-Global曳力模型能更准确地描述完全扩散区气液搅拌釜内流动情况。与传统曳力模型相比，采用DBS-Global曳力模型能显著提高对气含率的预测。

Abstract

3D Eulerian-Eulerian model was applied to simulate the flow in a gas-liquid stirred tank. Simulation results with different drag models were evaluated at the discharge flow region. CFD simulation could correctly predict the liquid velocity distribution around the impeller

but the traditional Schiller-Naumann drag model under-estimates the drag force

leading to the relatively lower gas holdup at the region under the impellers and gas distributor. The DBS-Global drag model derived from the gas-liquid EMMS model could obtain more reasonable gas holdup distribution at the complete dispersion regime and significantly improved the prediction accuracy of the gas holdup distribution at the discharge flow region.

关键词

Keywords

references

Views

570

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Numerical simulation and analysis of three-dimension cavitation in liquid nitrogen

Vortex formation characteristics of flow liquid film on corrugated plate

Movement characteristics of droplets and demisting efficiency of mist eliminator

Characteristics research of the charge-hold-vent method for cryogenic propellant tank chilldown in microgravity

Numerical study on flow boiling heat transfer in asymmetric serrated microchannel structures

Related Author

XU Lu

ZHU Jiakai

XIE Huangjun

ZHOU Rui

ZHANG Xiaobin

LIU Mei

LIU Qiusheng

WU Zhengren

Related Institution

Institute of Refrigeration and Cryogenics, Zhejiang University

School of Energy Power and Mechanical Engineering, North China Electric Power University

Department of Economic Management, North China Electric Power University

School of Energy and Environment, Southeast University

Department of Refrigeration and Cryogenic Engineering, Xi’an Jiaotong University

⁰