Effects of solid adsorption on vacuum flash water separation process with heat pipe

GAO Wenzhong; XU Changda; LI Changsong; WANG Dong; SU Tianlong

doi:10.11949/j.issn.0438-1157.20151909

您当前的位置：

首页 >

文章列表页 >

Effects of solid adsorption on vacuum flash water separation process with heat pipe

更新时间：2025-12-10

- Effects of solid adsorption on vacuum flash water separation process with heat pipe
- CIESC Journal Issue 9, Pages: 3755-3761(2016)
- 作者机构：
  
  上海海事大学商船学院,上海,201306
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20151909
  CLC： K124
- Online First：05 September 2016，
  
  Published：05 September 2016
- 稿件说明：
移动端阅览
GAO Wenzhong, XU Changda, LI Changsong, et al. Effects of solid adsorption on vacuum flash water separation process with heat pipe[J]. CIESC Journal, 2016, (9): 3755-3761.
DOI：

GAO Wenzhong, XU Changda, LI Changsong, et al. Effects of solid adsorption on vacuum flash water separation process with heat pipe[J]. CIESC Journal, 2016, (9): 3755-3761. DOI： 10.11949/j.issn.0438-1157.20151909.

摘要

液滴的过热度是维持其蒸发的关键因素，直接决定了盐水分离设备的水分离率。提出和设计了一种集高效热管传热和固体吸附技术为一体的盐水分离装置，并对质量分数为3%的NaCl溶液进行水分离实验，结果表明：热管能以高热通量快速传递液体闪蒸后二次沸腾所需的热量，显著增加单位时间内的水分离容积速率；引入吸附床后，蒸发室压力在吸附过程前半段有明显降低，降幅约为0.4～1 kPa，即降低了液滴的沸点，提升了过热度，这为更低品位的热源在盐水分离方面的利用提供了新途径；降低热源温度，吸附剂的吸附能力相应降低，要达到同样的水分离速率，需增加吸附剂用量。

Abstract

The superheat is the key factor for liquid drop to keep evaporating and it determines the water separation rate of the solute/water separator. A solute/water separation device combined with high efficient heat pipe and solid adsorption technology is developed in this paper. Water separation experiment of NaCl solution with concentration of 3% is conducted and the results show that the heat pipe can rapidly transfer heat to the drop just flashed for the second boiling with high heat flux and increase the water separation rate per unit volume. During the front half part of the adsorption process

the evaporator pressure value has a significant decrease by 0.4-1 kPa than that without adsorbent bed. Namely

the boiling point of drop is reduced and superheat is increased. This provides a new method for utilizing lower grade heat source in the solute/water separation.

关键词

Keywords

references

Views

126

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Heat transfer performance of a novel chemisorption heat pipe

Study on radial heat transfer coefficient of heat pipes considering microscale heat transfer in evaporating meniscus region

Numerical study on non-equilibrium condensation and flashing mechanisms in rapid expansion process of transcritical CO2

Application of reaction engineering approach in modelling vacuum baking of lithium battery

Experimental research on influence of abnormal shape on heat transfer performance of copper-water heat pipe

Related Author

WANG Liwei

CHEN Xiao’ou

YU Yang

ZHU Binglong

LIU Xiaohe

YAN Hongye

GONG Shuai

MA Shasha

Related Institution

School of Mechanical Engineering, Shanghai Jiao Tong University

Department of Materials Science, Shenzhen MSU-BIT University

Railway Engineering Research Institute, China Academy of Railway Sciences Corporation Limited

State Key Laboratory of Highspeed Railway Track System

School of Chemical Engineering and Technology, Xi’an Jiaotong University

⁰