Hydrophobic oil filter prepared by dry surface modification of quartz sand

LIU Guang; WEI Bigui; WU Fuping; CHANG Qing

doi:10.11949/j.issn.0438-1157.20151397

您当前的位置：

首页 >

文章列表页 >

Hydrophobic oil filter prepared by dry surface modification of quartz sand

更新时间：2025-12-10

- Hydrophobic oil filter prepared by dry surface modification of quartz sand
- CIESC Journal Issue 5, Pages: 2101-2108(2016)
- 作者机构：
  
  兰州交通大学环境与市政工程学院,甘肃,兰州,730070
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20151397
  CLC： 703.1
- Online First：05 May 2016，
  
  Published：05 May 2016
- 稿件说明：
移动端阅览
LIU Guang, WEI Bigui, WU Fuping, et al. Hydrophobic oil filter prepared by dry surface modification of quartz sand[J]. CIESC Journal, 2016, (5): 2101-2108.
DOI：

LIU Guang, WEI Bigui, WU Fuping, et al. Hydrophobic oil filter prepared by dry surface modification of quartz sand[J]. CIESC Journal, 2016, (5): 2101-2108. DOI： 10.11949/j.issn.0438-1157.20151397.

摘要

采用钛酸酯偶联剂DN101对石英砂滤料进行表面干法改性

增强滤料的亲油疏水性。通过单因素实验研究改性时间、DN101浓度以及改性温度对改性效果的影响

并以亲油亲水比LHR作为评判改性效果的标准。结果表明

反应时间为70 min、DN101用量为1.2%、反应温度为60℃时

DN101干法改性石英砂效果最好

LHR值由未改性时的1.25提高到最大值11.1;改性石英砂对15.61 mg·L-1含油废水的吸附容量由未改性时的0.17 mg·g-1增大到0.25 mg·g-1;对17.3 mg·L-1含油废水的过滤去除率由未改性时的72.6%提高到97.8%。扫描电镜、电子能谱和红外光谱分析结果表明

DN101以化学键的方式与石英砂表面官能团结合

对石英砂形成了均匀稳定的包覆层。

Abstract

The surface of quartz sand was modified by a dry method using Titanate coupling agent DN101 to improve the hydrophobic property of oil filter. The effects of reaction time

dosage of Titanate coupling agent DN101 and reaction temperature on the performance of the oil filter were studied by single factor experiment. The results show that the quartz sand modified by dry process using DN101 exhibits the best performance when the reaction time is 70 min

DN101 dosage 1.2% and reaction temperature 60℃. Lipophilic-Hydrophilic Ratio (LHR) increases from 1.25 to 11.1

the adsorption capacity has great improvement from 0.17 mg·g-1 to 0.25 mg·g-1 for 15.61 mg·L-1 oily wastewater and the oil removal rate of the modified quartz sand filter improves from 72.6% to 97.8% for 17.3 mg·L-1 oily wastewater. The analysis by SEM

XPS and FTIR shows that the chemical bonding combination of DN101 with the functional groups on quartz sand surface forms a uniform and stable cladding layer on the surface of quartz sand.

关键词

Keywords

references

Views

300

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Preparation of oil-in-water nanoemulsions used for protection ofshale gas reservoirs

Prediction model for COD in petrochemical wastewater influent based on temporal-spatial dual-stream convolutional neural network

Physics-informed neural networks for intelligent prediction of petrochemical wastewater treatment processes

Mechanism study on temperature and salt resistance of novel viscoelastic particle-based oil displacement agents

Research on process control of preparation of mesophase pitch by fluid catalytic cracking slurry oil

Related Author

QIU Zhengsong

DONG Bingqiang

ZHONG Hanyi

WANG Weiji

ZHAO Xin

SONG Dingding

LUO Yang

CHEN Lin

Related Institution

College of Petroleum Engineering, China University of Petroleum

No.2.Oil Production Plant of Daqing Oilfield

State Key Laboratory of Heavy Oil Processing, College of Chemical Engineering and Environment, China University of Petroleum

Petro-CyberWorks Information Technology Co., Ltd.

Exploration and Development Research Institute of Shengli Oilfield, SINOPEC

⁰