Influence of catalyst shape on methane steam reforming and simulation of industrial reactor

QIN Wen; ZHOU Zhiming; CHENG Zhenmin

doi:10.11949/j.issn.0438-1157.20151252

您当前的位置：

首页 >

文章列表页 >

Influence of catalyst shape on methane steam reforming and simulation of industrial reactor

更新时间：2025-12-10

- Influence of catalyst shape on methane steam reforming and simulation of industrial reactor
- CIESC Journal Issue 2, Pages: 563-572(2016)
- 作者机构：
  
  华东理工大学化学工程联合国家重点实验室,上海,200237
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20151252
  CLC： Q032TQ116.2+5
- Online First：05 February 2016，
  
  Published：05 February 2016
- 稿件说明：
移动端阅览
QIN Wen, ZHOU Zhiming, CHENG Zhenmin. Influence of catalyst shape on methane steam reforming and simulation of industrial reactor[J]. CIESC Journal, 2016, (2): 563-572.
DOI：

QIN Wen, ZHOU Zhiming, CHENG Zhenmin. Influence of catalyst shape on methane steam reforming and simulation of industrial reactor[J]. CIESC Journal, 2016, (2): 563-572. DOI： 10.11949/j.issn.0438-1157.20151252.

摘要

甲烷水蒸气重整工艺是现阶段最主要的工业制氢技术

催化剂颗粒形状和反应器操作条件是影响重整反应器性能和产物组成的重要因素。首先从颗粒尺度研究催化剂形状对甲烷水蒸气重整反应的影响

在不同的反应温度和压力下

计算并比较了球形、柱形和环形催化剂的效率因子

其大小顺序为:柱形 < 球形 < 环形。其次

将反应器床层的质量、热量和动量传递与环形催化剂颗粒的扩散-反应方程相结合

建立了用于描述甲烷水蒸气重整工业反应器的一维轴向数学模型。计算并分析了反应器进口温度和压力对反应器床层的温度和压力分布、催化剂效率因子以及甲烷转化率和各组分浓度分布的影响

确定了适宜的工业反应器进口温度和压力

分别为773 K和3 MPa。

Abstract

Methane steam reforming (MSR) is the most widely used technology for hydrogen production in industry now

where the shape of catalyst particles and the reactor operating conditions greatly influence the reactor performance and the product composition. Firstly

the present study investigated the effect of catalyst shape (sphere

cylinder and ring) on the MSR using a diffusion-reaction model on the particle scale. The effectiveness factors of shaped catalysts followed the sequence: cylinder < sphere < ring. Next

a one-dimensional mathematical model was developed by taking into account the mass

heat and momentum transfer on the reactor scale together with the diffusion-reaction equations on the catalyst scale

and used to describe an industrial MSR reactor. The effects of inlet temperature and pressure on the profiles of temperature and pressure inside the reactor

effectiveness factor

conversion of methane as well as concentration of various species were studied. Finally

the optimal inlet temperature and pressure for the industrial reactor were determined

being 773 K and 3 MPa

respectively.

关键词

Keywords

references

Views

271

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Simulation of active component thickness of egg-shell catalyst for F-T synthesis

Application of CFD to improve calculated process of methanation over plum-shaped catalyst

Model considering catalyst deactivation kinetics and equilibrium activity for catalytic cracking unit

Axial backmixing of liquid phase in a trickle bed reactor for selective hydrogenation of phenylacetylene

Study on performance enhancement and cold retention characteristics of solid packed bed cold energy storage

Related Author

Jingtao YING

Tao LI

ZHANG Jie

LI Tao

REN Jie

REN Yongmo

YUAN Haikuan

HU Jiawei

Related Institution

Engineering Research Center of Large Scale Reactor Engineering and Technology, East China University of Science and Technology

College of Chemical Engineering, Zhejiang University of Technology

School of Computer Science and Technology, Zhejiang University of Technology

Department of Chemical Engineering, Xi’an Jiaotong University

Engineering Research Center of New Energy System Engineering and Equipment, University of Shaanxi Province

⁰