CHEN Kaihong, MEI Ke, LI Haoran, et al. Synthesis of cinnamic acid-based ionic liquids and application in CO2 absorption[J]. CIESC Journal, 2016, (2): 623-626. DOI: 10.11949/j.issn.0438-1157.20151217.
DOI:
CHEN Kaihong, MEI Ke, LI Haoran, et al. Synthesis of cinnamic acid-based ionic liquids and application in CO2 absorption[J]. CIESC Journal, 2016, (2): 623-626. DOI: 10.11949/j.issn.0438-1157.20151217.DOI:
Synthesis of cinnamic acid-based ionic liquids and application in CO2 absorption
A series of cinnamic acid-based ionic liquids [P66614][CIN] were prepared and applied in the CO2 absorption. The results showed that the cinnamic acid-based ionic liquids exhibited good CO2 absorption performance. The CO2 absorption ability was influenced by the substituent in the cinnamic acid. The CO2 absorption capacity would decrease with increasing temperature or decreasing pressure. Furthermore
these ionic liquids exhibited excellent reversibility since higher CO2 absorption capacity can be maintained after 5 times of absorption/desorption circulation. The results of a combination of FT-IR spectrum and CO2 absorption under 10% CO2 indicated that CO2 was absorbed by chemisorption.
Absorption characteristics and mechanism of VOCs by tributyl(propyl)phosphonium ionic liquid
Synthesis of propylene carbonate from CO2 and propylene oxide: hydrogen bond activation strategy
Status and prospect on CO2 adsorption and separation by supported ionic liquids
Selected ionic liquids by COSMO-RS method for tar removal
Absorption of low-concentration CO2 by industrial effluents: feasibility and application
Related Author
ZHAO Feifan
ZHU Jiamei
KANG Jie
TAN Liang
DUAN Jingyu
ZHANG Guangyu
FU Ranfei
SUN Bing
Related Institution
School of Chemical Engineering, China University of Mining and Technology
National Key Laboratory of Chemical Safety, SINOPEC Research Institute of Safety Engineering Co., Ltd.
State Key Laboratory of Heavy Oil Processing, China University of Petroleum
Advanced Energy Science and Technology Guangdong Laboratory
Engineering Research Center of Advanced Functional Material Manufacturing of Ministry of Education, School of Chemical Engineering, Zhengzhou University