Study on permeability of asymmetric ceramic membrane tubes with CFD simulation

YANG Zhao; CHENG Jingcai; YANG Chao; LIANG Bin

doi:10.11949/j.issn.0438-1157.20150840

您当前的位置：

首页 >

文章列表页 >

Study on permeability of asymmetric ceramic membrane tubes with CFD simulation

更新时间：2025-12-10

- Study on permeability of asymmetric ceramic membrane tubes with CFD simulation
- CIESC Journal Issue 8, Pages: 3120-3129(2015)
- 作者机构：
  
  1. 四川大学化学工程学院,四川,成都,610065
  2. 中国科学院过程工程研究所,北京,100190
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20150840
  CLC： Q028.8
- Online First：05 August 2015，
  
  Published：05 August 2015
- 稿件说明：
移动端阅览
YANG Zhao, CHENG Jingcai, YANG Chao, et al. Study on permeability of asymmetric ceramic membrane tubes with CFD simulation[J]. CIESC Journal, 2015, (8): 3120-3129.
DOI：

YANG Zhao, CHENG Jingcai, YANG Chao, et al. Study on permeability of asymmetric ceramic membrane tubes with CFD simulation[J]. CIESC Journal, 2015, (8): 3120-3129. DOI： 10.11949/j.issn.0438-1157.20150840.

摘要

陶瓷膜因其化学稳定性好、机械强度大等优点得到广泛应用。计算流体力学(CFD)的快速发展使得计算模拟成为研究和优化陶瓷膜管结构性能的有效手段。为了优化非对称结构陶瓷膜管的结构和操作参数

对其渗透性能进行了CFD计算模拟。针对非对称结构陶瓷膜管的膜层和过渡层的厚度在10 μm级的特点

采用Navier-Stokes方程和Darcy定律来分别描述膜管内和膜多孔介质内的纯水流动

利用多孔介质模型描述膜管的主体支撑层

用多孔跳跃边界简化膜管的膜层和过渡层

利用Konzey-Carmen方程对膜元件各层的渗透率进行估算。计算结果与实验值吻合较好

为优化陶瓷膜管的通道结构提供了便捷的工具。

Abstract

Ceramic membranes have been widely used in chemical industry on account of their inherently superior physical integrity

chemical resistance and separation performance. Rapid development of computational fluid dynamics (CFD) has made numerical simulation an effective mean of researching and optimizing the structure and permeability of ceramic membrane tubes. In this paper the permeability of asymmetric ceramic membrane tubes was simulated with CFD in order to optimize the ceramic membrane tube structure and operating parameters. The thickness of ceramic top-layer and intermediate-layer of an asymmetrically-structured membrane is about tens of micron

so an effective simplified calculation model is put forward in this work. A porous media model was applied to the porous support of the ceramic membrane tube. The ceramic top-layer and intermediate-layer of the ceramic membrane tube were described with porous jump boundary conditions. The permeability of ceramic membrane was effectively evaluated by the classic Konzey-Carmen (KC) equation. The CFD results showed a good agreement with the experimental data. This quick and easy calculation method provides an effective tool to optimize the structure of membrane tubes.

关键词

Keywords

references

Views

145

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research progress in poly(ionic liquids) materials for CO2 membrane separation

Preparation and properties of temperature-responsive PVDF/PGS-g-PNIPAM nanocomposite ultrafiltration membrane

Surface modification of reverse osmosis membrane by electrostatic deposition of polyelectrolyte for performance improvement

Ejection profile and kinetics of droplets spreading on superhydrophilic porous surfaces

Development of pressure retarded osmosis membrane

Related Author

Yifei CHEN

Jiaming WANG

Xuehua RUAN

Gaohong HE

Ailian XUE

Shouyong ZHOU

Jianjian CAI

Meisheng LI

Related Institution

School of Chemical Engineering at Panjin, Dalian University of Technology

Jiangsu Engineering Laboratory for Environment Functional Materials, Jiangsu Key Laboratory for Chemistry of Low-Dimensional Materials, School of Chemistry and Chemical Engineering, Huaiyin Normal University, Huai’an

State Key Laboratory of Chemical Engineering, School of Chemical Engineering and Technology, Tianjin University

Collaborative Innovation Center of Chemistry and Chemical Engineering(Tianjin)

Tianjin Key Laboratory of Membrane Science and Desalination Technology

⁰