LNG storage tank is one of the most important and expensive devices for LNG terminals.The process of pre-cooling the LNG storage tank is the most critical and most dangerous debugging session.Based on the principle of gas-liquid two-phase volume node
the large-scale LNG storage tank pre-cooling dynamic simulation model was established.Taking a 160000 m3 LNG tank as an example
the time required for the pre-cooling process and the total used LNG for the tank pre-cooling were computed and the pressure of the LNG storage tank
the amount of BOG generation and the temperature of the tank during the pre-cooling process were determined with the established dynamic model.The optimization of the pre-cooled process design for a large-scale LNG storage tank was provided in a theoretical basis.
Multi objective optimization of flow and heat transfer characteristics of modified manifold microchannel heat sink based on machine learning
Study on performance enhancement and cold retention characteristics of solid packed bed cold energy storage
Optimization of thermal insulation performance of cryogenic vessel based on actively cooled thermal shield insulation
Sequential quadratic programming optimization of continuous variable density multi-layer insulation coupled with vapor cooled shield in liquid hydrogen storage tank
Research progress on heat transfer enhancement and application of oscillating heat pipe
Related Author
TANG Songzhen
ZHANG Feiyang
YAN Ji
ZHANG Muqiao
GUO Ming
WANG Chenchen
ZHANG Jinya
SUN Na
Related Institution
School of Mechanical and Power Engineering, Zhengzhou University
BK21 FOUR ERICA-ACE Center, Hanyang University
School of Mechanical and Storage and Transportation Engineering, China University of Petroleum
School of Petrochemical Engineering, Lanzhou University of Technology