Synthesis of Li3PO4-doped Li(Ni0.5Co0.2Mn0.3)O2 by rheological phase method and its electrochemical performance as cathode material for Li-ion batteries
|更新时间:2025-12-10
|
Synthesis of Li3PO4-doped Li(Ni0.5Co0.2Mn0.3)O2 by rheological phase method and its electrochemical performance as cathode material for Li-ion batteries
Zhang Rui, WU Yuanxin, HE Yunwei, et al. Synthesis of Li3PO4-doped Li(Ni0.5Co0.2Mn0.3)O2 by rheological phase method and its electrochemical performance as cathode material for Li-ion batteries[J]. CIESC Journal, 2015, (8): 3177-3182. DOI: 10.11949/j.issn.0438-1157.20150562.
DOI:
Zhang Rui, WU Yuanxin, HE Yunwei, et al. Synthesis of Li3PO4-doped Li(Ni0.5Co0.2Mn0.3)O2 by rheological phase method and its electrochemical performance as cathode material for Li-ion batteries[J]. CIESC Journal, 2015, (8): 3177-3182. DOI: 10.11949/j.issn.0438-1157.20150562.DOI:
Synthesis of Li3PO4-doped Li(Ni0.5Co0.2Mn0.3)O2 by rheological phase method and its electrochemical performance as cathode material for Li-ion batteries
0<z<1) has become prosperous materials for the next generation of rechargeable lithium ion battery due to the synergistic effect of the three elements and their higher discharge voltage platform and charge-discharge capacity
but the cycle stability still need to be improved. The Ni0.5Co0.2Mn0.3(OH)2 precursor was synthesized by using the method of hydroxide co-precipitation and the lithium phosphate doped Li(Ni0.5Co0.2Mn0.3)O2 powders prepared by rheological phase reaction. The crystal structure and electrochemical performance of Li3PO4 doped Li(Ni0.5Co0.2Mn0.3)O2 powders were measured by X-ray diffraction (XRD)
energy dispersive X-ray spectroscopy (EDS)
galvanostatic charge-discharge
cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The result indicated that Li(Ni0.5Co0.2Mn0.3)O2 doped with Li3PO4 powders maintained the laminated structure of α-type-NaFeO2
and the spherical powders were agglomerated with primary particles around 1 μm. The initial discharge capacity of Li(Ni0.5Co0.2Mn0.3)O2 powders doped with 1% (mass) Li3PO4 was 188.6 mA·h·g-1 (2.2—4.6 V vs Li+/Li)
and maintained 92.9% after 30 cycles at 0.1C. Moreover
CV results showed that oxidation and reduction potential of Li(Ni0.5Co0.2Mn0.3)O2 powders doped with 1% Li3PO4 were 3.98 and 3.64 V
the polarization of the sample was 0.34 V. The EIS tests showed that the charge transfer resistance and Warburg resistance of Li(Ni0.5Co0.2Mn0.3)O2 powders doped with 1% Li3PO4 were 36.7 and 0.08661 Ω. So that
Li3PO4 components can reduce the charge transfer resistance and Li+ diffusion resistance between electrode and electrolyte
and decrease the effect of polarization
thus promote the electrochemical performance of Li(Ni0.5Co0.2Mn0.3)O2.
Electrochemical performance of Li3VO4 modified Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode materials
Composite materials of Li2ZrO3 coated LiNi0.8Co0.1Mn0.1O2 and its electrochemical properties
Investigation on synthesis conditions of LiNi1-x-yCoxMnyO2 cathode material via co-precipitation
Optimization for synthesis technology of LiNi0.8Co0.1Mn0.1O2 cathode material and electrochemical performance
Effects of Cr-doping on structure and electrochemical performance of lithiumand manganese-rich cathode materials Li1.2Ni0.2Mn0.6O2
Related Author
SONG Liubin
TANG Fuli
XIAO Zhongliang
SONG Liubin
LIU Jiao
XIAO Zhongliang
LI Lingjun
CAO Zhong
Related Institution
School of Chemistry and Biological Engineering, Changsha University of Science and Technology
Hunan Provincial Key Laboratory of Materials Protection for Electric Power and Transportation, School of Chemistry and Biological Engineering, Changsha University of Science and Technology
College of Materials Science and Engineering, Changsha University of Science and Technology
Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences
Key Laboratory of Green Process and Engineering, Institute of Process Engineering, Chinese Academy of Sciences