Electro-spraying and combustion of alcohol in micro-combustorwith single electrode

GAN Yunhua; TONG Yang; LUO Zhibin

doi:10.11949/j.issn.0438-1157.20150530

您当前的位置：

首页 >

文章列表页 >

Electro-spraying and combustion of alcohol in micro-combustorwith single electrode

更新时间：2025-12-10

- Electro-spraying and combustion of alcohol in micro-combustorwith single electrode
- CIESC Journal Issue 11, Pages: 4597-4602(2015)
- 作者机构：
  
  华南理工大学电力学院,广东,广州,510640
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20150530
  CLC： K16
- Online First：05 November 2015，
  
  Published：05 November 2015
- 稿件说明：
移动端阅览
GAN Yunhua, TONG Yang, LUO Zhibin. Electro-spraying and combustion of alcohol in micro-combustorwith single electrode[J]. CIESC Journal, 2015, (11): 4597-4602.
DOI：

GAN Yunhua, TONG Yang, LUO Zhibin. Electro-spraying and combustion of alcohol in micro-combustorwith single electrode[J]. CIESC Journal, 2015, (11): 4597-4602. DOI： 10.11949/j.issn.0438-1157.20150530.

摘要

采用荷电喷雾燃烧技术是促进微尺度下液体燃料稳定燃烧的重要方法。使用乙醇为燃料

在新型结构的喷嘴内径为0.8 mm微尺度单电极燃烧器内

进行了荷电雾化与燃烧特性的实验研究。结果表明:荷电雾化会随喷嘴电压升高而出现4种模式

对应的荷质比在脉动模式下最低

到达锥-射流模式后出现跃升

在锥-射流模式下最为稳定。荷电雾化后的乙醇在燃烧器网格处稳定燃烧

火焰温度随着当量比增大先上升后下降。火焰温度在当量比=1.0时达到最高值

且随电压增大而上升。锥-射流模式下

当量比=1.0时

燃烧效率可达89%

燃料转换效率可达90%。稳定的雾化模式以及合适的当量比

对燃烧效果具有较大的改善作用。

Abstract

Electro-spraying is an important technique to enhance combustion of liquid fuel in micro-scale. A new combustor with nozzle diameter of 0.8 mm and single electrode was designed and fabricated. Experimental studies on electro-spraying and combustion were carried out using alcohol as fuel. Results showed four different electro-spraying modes with the variation of nozzle potential. The specific charges were measured at different electro-spraying modes

which were lower at the pulsed-jet mode

increased greatly

and reached a stable value at the cone-jet mode. The atomized alcohol was ignited and combusted stably near the mesh

which can be regarded as a flame holder. The flame temperatures increased first and then decreased with the increase of equivalent ratio. The flame temperature reached the maximum value at the equivalent ratio of 1.0

and the maximum value increased with the increase of nozzle potential. At the equivalent ratio of 1.0

the combustion efficiency reached 89% and fuel conversion efficiency reached 90% at cone-jet mode. The stable electro-spraying mode and suitable equivalent ratio are very important to the enhancement of combustion of alcohol in micro-scale.

关键词

Keywords

references

Views

306

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Effects of methanol energy substitution ratio on performance of a methanol/diesel dual direct injection engine

Combustion characteristics of premixed C1-C4 alkane jet flames between two parallel walls

Modeling and control simulation of a small-scale diffusion flame under direct-current electric fields

Effects of diesel injection strategy on performance of methanol/diesel dual direct injection engine

Effect of belt structure design on the vulcanization characteristics of all-steel radial tires

Related Author

DUAN Hao

WANG Wenchao

LIU Dong

YIN Xiaojun

HU Erjiang

ZENG Ke

CAO Hailiang

NIAN Zhiyuan

Related Institution

School of Energy and Power Engineering, Xi’an Jiaotong University

Beijing Institute of Aerospace Testing Technology

Weichai Power Co., Ltd.

School of Chemical Engineering and Energy, Zhengzhou University

Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences

⁰