A series of acidic ether functionalized chloroaluminate ionic liquids were synthesized and studied. The catalyst with the highest acidity was screened out by FT-IR spectra using acetonitrile as infrared probe and used to catalyze the alkylation of isobutane with 2-butene. It was proved that the acidity of 1-methoxyethyl-3- methylimidazolium bromide aluminium chloride ([MOEMIM]Br/AlCl3) was the highest when the molar ratio of AlCl3 was 0.75. The high quality alkylate with a C8 selectivity of 66.6%(mass) was obtained at 35℃ with the isoparaffin/olefin molar ratio (I/O) of 10
which was much better than that with non-ether functionalized chloroaluminate ionic liquids. The catalysts could be reused several times without obvious loss of activity.
Investigation of Pt-Ga/CeO2-ZrO2-Al2O3 bifunctional catalyst for the catalytic conversion of n-butane into olefins
Study on catalytic synthesis of sec-butanol by tunable choline-based basic ionic liquids
Effect of the morphology of Ru/α-MnO2 on NH3-SCO performance
Research progress of catalytic pyrolysis of biomass to yield levoglucosenone
Synthesis of glycerol monolaurate using functionalized ionic liquids catalysts
Related Author
MO Jinhong
HAN Xue
ZHU Yixiang
LI Jing
WANG Xuyu
JI Hongbing
CHEN Jie
LIN Yongsheng
Related Institution
School of Chemistry and Chemical Engineering, Guangxi University
School of Environmental and Chemical Engineering, Jiangsu University of Science and Technology
State Key Laboratory Breeding Base of Green-Chemical Synthesis Technology, Institute of Green Petroleum Processing and Light Hydrocarbon, College of Chemical Engineering, Zhejiang University of Technology
College of Chemical Engineering, Fuzhou University