WANG Haiyong, LÜ Hui, LIN Chen, et al. Application of supported alkali catalysts in Prins reaction[J]. CIESC Journal, 2015, (10): 3911-3918.
DOI:
WANG Haiyong, LÜ Hui, LIN Chen, et al. Application of supported alkali catalysts in Prins reaction[J]. CIESC Journal, 2015, (10): 3911-3918.DOI: 10.11949/j.issn.0438-1157.20150187.
Application of supported alkali catalysts in Prins reaction
n=1 or 2) prepared by impregnation method and C-Cs2O/Al2O3 by co-precipitation method were applied in Prins reaction. Their base amount and pKa in water were determined. The structure and physico-chemical properties of the carrier and prepared catalysts were characterized by CO2-TPD
X-ray diffraction
and nitrogen adsorption. The performance of catalysts was evaluated by condensation reaction of isobutene with paraformaldehyde to produce 3-methyl-3-buten-1-ol. The results showed that the performance of catalysts related directly with their basic property and structure. The C-Cs2O/Al2O3 catalyst had stronger basicity and showed superior catalytic performance
and the conversion of formaldehyde and selectivity to MBO reached up to 100.0% and 86.0% respectively. The mechanism of Prins reaction over solid base catalyst was also discussed. The base sites could active the a-H of isobutene
Research progress and tendency of CO2 electrocatalytic reduction to syngas
Research progress on electrocatalytic decomposition of ammonia for hydrogen production
Fe-Ce/SiO2 solid base catalyst for preparing dimethyl carbonate
Progress on mechanism and catalysts of biomass syngas methanation
New technique of biodiesel preparation catalyzed by KOH/ZrO2
Related Author
LI Xin
ZENG Shaojuan
PENG Kuilin
YUAN Lei
ZHANG Xiangping
Zhonghua WANG
Songsheng ZHENG
Yudong YAO
Related Institution
Henan Institute of Advanced Technology, Zhengzhou University
Beijing Key Laboratory of Ionic Liquids Clean Process, State Key Laboratory of Multiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences
Engineering Research Center of Advanced Functional Material Manufacturing of Ministry of Education, School of Chemical Engineering, Zhengzhou University