Investigation of sponge-like substrates for preparation of reverse osmosis composite membranes

ZHU Shu; ZHAO Song; WANG Zhi; TIAN Xinxia; SHI Mengqi; WANG Jixiao

doi:10.11949/j.issn.0438-1157.20150161

您当前的位置：

首页 >

文章列表页 >

Investigation of sponge-like substrates for preparation of reverse osmosis composite membranes

更新时间：2025-12-10

- Investigation of sponge-like substrates for preparation of reverse osmosis composite membranes
- CIESC Journal Issue 10, Pages: 3991-3999(2015)
- 作者机构：
  
  天津大学化工学院化学工程研究所, 天津化学化工协同创新中心, 化学工程联合国家重点实验室天津大学, 天津市膜科学与海水淡化技术重点实验室,天津,300072
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20150161
  CLC： Q028.8
- Online First：05 October 2015，
  
  Published：05 October 2015
- 稿件说明：
移动端阅览
ZHU Shu, ZHAO Song, WANG Zhi, et al. Investigation of sponge-like substrates for preparation of reverse osmosis composite membranes[J]. CIESC Journal, 2015, (10): 3991-3999.
DOI：

ZHU Shu, ZHAO Song, WANG Zhi, et al. Investigation of sponge-like substrates for preparation of reverse osmosis composite membranes[J]. CIESC Journal, 2015, (10): 3991-3999. DOI： 10.11949/j.issn.0438-1157.20150161.

摘要

通过调节铸膜液中聚砜浓度和非溶剂含量

浸没沉淀法制备海绵状结构的支撑膜

并在支撑膜上界面聚合制备聚酰胺反渗透复合膜。分别对支撑膜及反渗透复合膜的结构和性能进行表征

考察聚砜浓度对支撑膜结构和性能的影响

以及不同结构支撑膜对反渗透复合膜结构和性能的影响。结果显示

随着聚砜浓度的增加

支撑膜表面孔径和孔隙率下降

断面结构变致密

耐压性增强。在不同支撑膜上制备的反渗透复合膜具有不同的通量和脱盐率。综合考虑支撑膜及反渗透复合膜的性能

以聚砜浓度为15%制备的海绵状结构支撑膜更适于作为制备反渗透复合膜的支撑层。

Abstract

A series of sponge-like polysulfone substrates were fabricated by adjusting the content of PSf and water in the casting solutions. Then

the polyamide reverse osmosis composite membranes were prepared via interfacial polymerization between m-phenylenediamine and trimethyl chloride over the polysulfone substrates. The resulting substrates and reverse osmosis membranes were characterized to investigate the influence of the polysulfone concentration on the substrates properties and the effect of the substrates properties on the polyamide reverse osmosis membranes. The results showed that with increasing PSf concentration

the average surface pore size and porosity of the substrates decreased

and the resistance ability to compaction enhanced. Besides

the reverse osmosis composite membranes prepared by using different PSf substrates showed different flux and salt rejection. Considering the properties of the substrates and the polyamide reverse osmosis composite membranes

sponge-like substrate by using 15%(mass) polysulfone concentration was suitable for the preparation of reverse osmosis composite membrane.

关键词

Keywords

references

Views

455

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Forward-osmosis strategy and chemical cleaning of seawater desalination reverse osmosis membranes

Optimization of polyamide selective layer for preparation of high permselectivity reverse osmosis membranes

Research progress of antifouling aromatic polyamide reverse osmosis membrane

Preparation and performance of graphene oxide doped reverse osmosis mixed matrix membrane

Fabrication and hydrophilic properties of polysulfone/modified multiwalled carbon nanotube composite membranes

Related Author

Ming TAN

Wenguang WANG

Xiaodong ZHANG

Hongwu ZHAO

Yang ZHANG

Xingtao YANG

Jiao DU

Zhi WANG

Related Institution

College of Environment and Safety Engineering, Qingdao University of Science & Technology

Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences

Qingdao Befesa Seawater Desalination Co. Ltd.

Chemical Engineering Research Center, School of Chemical Engineering and Technology, Tianjin Key Laboratory of Membrane Science and Desalination Technology, State Key Laboratory of Chemical Engineering, Collaborative Innovation Center of Chemical Science and Engineering, Tianjin University

Chemical Engineering Research Center, School of Chemical Engineering and Technology, Tianjin University

⁰