Effects of reaction progress in microchannel on microstructure of Cu-Zn catalyst

CHEN Yuping; JIANG Xin; LU Jiangang

doi:10.11949/j.issn.0438-1157.20150121

您当前的位置：

首页 >

文章列表页 >

Effects of reaction progress in microchannel on microstructure of Cu-Zn catalyst

更新时间：2025-12-10

- Effects of reaction progress in microchannel on microstructure of Cu-Zn catalyst
- CIESC Journal Issue 10, Pages: 3895-3902(2015)
- 作者机构：
  
  1. 浙江大学化学工程与生物工程学院,浙江,杭州,310027
  2. 浙江大学控制科学与工程学系, 工业控制技术国家重点实验室,浙江,杭州,310027
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20150121
  CLC： 643.3
- Online First：05 October 2015，
  
  Published：05 October 2015
- 稿件说明：
移动端阅览
CHEN Yuping, JIANG Xin, LU Jiangang. Effects of reaction progress in microchannel on microstructure of Cu-Zn catalyst[J]. CIESC Journal, 2015, (10): 3895-3902.
DOI：

CHEN Yuping, JIANG Xin, LU Jiangang. Effects of reaction progress in microchannel on microstructure of Cu-Zn catalyst[J]. CIESC Journal, 2015, (10): 3895-3902. DOI： 10.11949/j.issn.0438-1157.20150121.

摘要

采用微通道反应器制备了铜锌催化剂

并利用透射电子显微镜(TEM)、X射线衍射(XRD)和X射线光电子能谱(XPS)等手段进行了表征。HRTEM和XPS分析表明

微反应器样品中 CuO和ZnO之间的相互分散性更好

两者之间的接触更为紧密

液相合成气制甲醇实验表明其活性高于传统共沉淀法催化剂。对比微通道反应器和传统共沉淀法的反应历程表明

微混合器内强烈的湍动和极小的空间

使Cu2+、Zn2+的沉淀过程更为均匀

增强了铜锌相互分散

强化了铜锌相互作用;同时

Cu2+和Zn2+在微反应器内经历了更为均匀一致的反应历程

得到的催化剂在结构上更加均匀。通过研究稳定段长度的影响发现

铜锌催化剂前驱体形成后需要经过30 s的停留时间

其结构才能基本稳定。

Abstract

The Cu/ZnO catalysts were prepared via microchannel reactor and characterized by TEM

XRD and XPS. It was difficult to find the individual CuO or ZnO region in HRTEM picture and XPS analysis indicated that the interaction between CuO and ZnO in microchannel samples was stronger than that in classical co-precipitation samples. The results of methanol synthesis from syngas in liquid manifested that the activity of microchannel catalysts was higher than that of classical co-precipitation catalysts. Comparing the precipitation in microchannel reactor with that of classical co-precipitation

it was found that the strong turbulent and tiny space resulted in a more uniform precipitation of Cu2+ and Zn2+

intensifying the dispersion and interaction between copper and zinc. In addition

the plug flow in the microchannel reactor made Cu2+ and Zn2+ undergo more uniform reaction course and form catalysts with more homogeneous structure. The research on tube length indicated that 30 s of the residence time was needed for the Cu-Zn precursors to reach the preliminary structural stability.

关键词

Keywords

references

Views

288

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Flow characteristics and micromixing performance of micro-CSTR with magnetic stirring

Synthesis process of trinitrophloroglucinol in an ultrasonic microreactor

Microreaction continuous synthesis of gold nanoparticles

Influence of mixing inside microreactor on microstructural evolution of Cu-ZnO catalyst

Sonochemical microreactor-synergistic intensification of ultrasound and microreactor

Related Author

ZHONG Zihao

LIU Sai'er

SHANG Minjing

SU Yuanhai

Yuehui HOU

Xuan LIU

Yingjiang LIAN

Mei HAN

Related Institution

Key Laboratory of Thin Film and Microfabrication (Ministry of Education), School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University

Dalian Institute of Chemical Physics, Chinese Academy of Sciences

University of Chinese Academy of Sciences

Department of Chemical Engineering, State Key Laboratory of Chemical Engineering, Tsinghua University

Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology, College of Chemical and Biological Engineering, Zhejiang University

⁰