Application of CPFD in hopper discharge of fine granular material

ZHAO Wei; LU Haifeng; GUO Xiaolei; GONG Xin

doi:10.11949/j.issn.0438-1157.20141263

您当前的位置：

首页 >

文章列表页 >

Application of CPFD in hopper discharge of fine granular material

更新时间：2025-12-10

- Application of CPFD in hopper discharge of fine granular material
- CIESC Journal Issue 2, Pages: 512-521(2015)
- 作者机构：
  
  华东理工大学煤气化及能源化工教育部重点实验室, 上海市煤气化工程技术研究中心,上海,200237
- 作者简介：
- 基金信息：
- DOI：10.11949/j.issn.0438-1157.20141263
  CLC： Q536
- Online First：05 February 2015，
  
  Published：05 February 2015
- 稿件说明：
移动端阅览
ZHAO Wei, LU Haifeng, GUO Xiaolei, et al. Application of CPFD in hopper discharge of fine granular material[J]. CIESC Journal, 2015, (2): 512-521.
DOI：

ZHAO Wei, LU Haifeng, GUO Xiaolei, et al. Application of CPFD in hopper discharge of fine granular material[J]. CIESC Journal, 2015, (2): 512-521. DOI： 10.11949/j.issn.0438-1157.20141263.

摘要

借助计算颗粒流体力学(CPFD)的数值模拟方法

研究了细颗粒玻璃微珠在不同结构料仓内的下料特性

获得了料仓出口直径和半锥角对颗粒下料流动的影响。在实验室可视化下料平台开展了验证实验

模拟结果与实验结果吻合较好。模拟结果表明:下料流率与料仓出口直径2.5次方呈正比;料仓半锥角增大

下料流型从质量流过渡至漏斗流。CPFD模拟给出了料仓下料过程的细节信息

并获得了料仓结构对颗粒流动形态转变的临界面相对高度的影响。

Abstract

The flow of 82 μm-diameter powder and the effect of hopper structure(hopper diameter

angle) on transition surface height and flow pattern in a 3D conical hopper were studied using the computational particle fluid dynamic (CPFD) numerical scheme. The validity of the calculated results was confirmed by comparing them with experimental results. CPFD simulation was fully capable of reproducing the discharging process. CPFD numerical 3D calculations showed that solids flow rate increased with increasing hopper diameter to the 2.5th power. As hopper angle increased

flow pattern in hopper transformed from mass-flow to funnel-flow. CPFD could give the change of transition surface height with hopper structure.

关键词

Keywords

references

Views

352

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Design and study on dual-layer rotor cage for ultrafine powder classification

Numerical simulation of hydrogen reduction of U3O8 in fluidized bed reactors using CPFD method

Impact of viscosity model on simulation of condensed particle flow by Euler multiphase flow model

Flow characteristics of granule discharged from eccentric wedge-shaped feed hopper

Comparative study on shape-induced radial segregation characteristics of particles in rotating drums of different sizes

Related Author

LI Xingshuai

YU Yuan

LI Shuyue

WANG Huan

ZHOU Shaoqiang

MAO Zhihong

ZHANG Yongmin

WANG Junwu

Related Institution

College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology

State Key Laboratory of Heavy Oil Processing, China University of Petroleum

CNNC No.7 Research and Design Institute Co., Ltd.

State Key Laboratory of Chemical Engineering, Zhejiang University

Zhejiang Provincial Key Laboratory of Advanced Chemical Engineering Manufacture Technology

⁰