Al-Si-Cr coating was prepared on the surface of 25Cr35NiNb alloy by pack cementation
and its anti-coking properties were studied by coking experiment using ethylene cracking test apparatus. The microstructure of coating and the morphology of coke were investigated with metallurgic microscope
electronic scanning microscope (SEM) and energy dispersive X-ray spectrometer (EDS). Al-Si-Cr coating with thickness of about 130 mm was obtained by pack cementation. The coating had multiple layers with dense structure
consisting of an outer layer composed of aluminum-silicon-rich compounds and an inner layer composed of chromium- silicon-rich compounds. The Al-Si-Cr coating had excellent coking inhibiting properties. It could inhibit catalytic coking effectively
Research progress on bio-based anti-corrosion coating
Preparation of MnO coating based on electroplating-low oxygen partial pressure treatment and coking inhibition properties during thermal cracking of naphtha
Pyrolysis and coking behavior of typical liquid hydrocarbon fuels in hot pipe
Research progress on the water resistance of degradable cellulose-based materials
Summary of improving erosion and corrosion resistance of heat exchange surfaces in boilers through HVOF technology
Related Author
CHEN Zihan
LIU Xiaoyang
YANG Tianxiang
WANG Zhi
ZHAO Song
LI Zhongqing
WANG Zhiyuan
LUAN Xiaojian
Related Institution
Chemical Engineering Research Center, School of Chemical Engineering and Technology, State Key Laboratory of Chemical Industry and Low-carbon Technology, Tianjin Key Laboratory of Membrane Science and Desalination Technology, Tianjin Collaborative Innovation Center of Chemical Science and Engineering, Tianjin University
School of Resources and Environmental Engineering, East China University of Science and Technology
School of Energy and Power Engineering, University of Shanghai for Science and Technology
Institute of Process Engineering, Chinese Academy of Sciences
Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences