Effect of inlet structures on discrete particles behavior based on concave-wall jet

ZHANG Jing; WANG Wei; SONG Shuning; GONG Bin; LI Yaxia; WANG Xueping; WU Jianhua

doi:10.11949/0438-1157.20190177

您当前的位置：

首页 >

文章列表页 >

Effect of inlet structures on discrete particles behavior based on concave-wall jet

更新时间：2026-07-24

- Effect of inlet structures on discrete particles behavior based on concave-wall jet
- CIESC Journal Vol. 70, Issue 8, Pages: 3021-3032(2019)
- 作者机构：
  
  1.沈阳化工大学辽宁省化工新技术转移推广中心，辽宁沈阳 110142
  2.天津大学化工学院，天津 300072
  3.昆士兰大学化学与分子生物科学学院，澳大利亚布里斯班 4067
- 作者简介：
- 基金信息：
- DOI：10.11949/0438-1157.20190177
  CLC： O 358
- Received：03 March 2019，
  
  Revised：2019-04-30，
  
  Online First：24 July 2026，
  
  Published：05 August 2019
- 稿件说明：
移动端阅览
张静, 王巍, 宋姝宁, 龚斌, 李雅侠, 王学平, 吴剑华. 入口结构对三维凹壁面切向射流作用下离散颗粒行为的影响[J]. 化工学报, 2019, 70(8): 3021-3032

ZHANG Jing, WANG Wei, SONG Shuning, GONG Bin, LI Yaxia, WANG Xueping, WU Jianhua. Effect of inlet structures on discrete particles behavior based on concave-wall jet[J]. CIESC Journal, 2019, 70(8): 3021-3032
张静, 王巍, 宋姝宁, 龚斌, 李雅侠, 王学平, 吴剑华. 入口结构对三维凹壁面切向射流作用下离散颗粒行为的影响[J]. 化工学报, 2019, 70(8): 3021-3032 DOI： 10.11949/0438-1157.20190177.

ZHANG Jing, WANG Wei, SONG Shuning, GONG Bin, LI Yaxia, WANG Xueping, WU Jianhua. Effect of inlet structures on discrete particles behavior based on concave-wall jet[J]. CIESC Journal, 2019, 70(8): 3021-3032 DOI： 10.11949/0438-1157.20190177.

摘要

液固分离是煤化工污水处理中的常规操作单元，待处理物料贴着圆筒体内壁面切向进入分离设备，形成三维凹壁面切向射流。为了比较射流入口结构对离散颗粒产生的影响，利用液固分离实验和离散相模型模拟研究了颗粒的轨迹和Reynolds数，并对加入颗粒前后凹壁面切向射流的湍动特性和壁面剪应力分布进行分析。研究结果表明，半圆形、方形、圆形入口与设备内壁面贴合长度依次缩短，颗粒沿径向分布范围依次加宽，流向行程依次缩短。而颗粒停留时间按照圆形、半圆形、方形依次缩短。其原因在于，半圆形入口切向最大速度比方形提高16.0%，圆形降低15.3%。近壁面一倍射流高度范围内的离心力平均值，半圆形入口比方形提高59.9%，圆形降低43.5%。三种入口结构下97%的颗粒Reynolds数在40～400范围内，Reynolds数为80的颗粒数量最多。颗粒受凹壁面切向射流的影响，入口周向10°～35°范围内，离散颗粒与壁面形成第一次冲击，最大壁面剪应力值出现持平趋势，超过 90°以后，颗粒沿壁面滚动下滑，壁面剪应力逐渐趋于0。经过计算，方形、半圆形、圆形三种入口结构加入离散颗粒后湍动强度分别提高27.1%、8.8%、62.7%，壁面剪应力分别提高23.7%、13.5%、15.2%。

Abstract

Liquid-solid separation is a common operation unit in coal chemical wastewater treatment. The material to be treated is tangentially inserted into the separation device against the inner wall surface of the cylinder to form a three-dimensional concave wall tangential jet. In order to compare the influence of the jet inlet structures on discrete particles

the liquid-solid separation experiment and discrete phase model are used to calculate the trajectory and Reynolds number of the particles. The continuous phase turbulence characteristics are investigated under the influence of the particles

and the distribution of wall shear stress was analyzed. The results show that the fit length between inlet and wall are shortened for semi-circular

square and circular. The radial distribution range of particles is sequentially widened

and the distance of flow direction is sequentially shortened. The particle residence time is shortened in the order of circle

semi-circular

and square inlets. The reason is that the maximum tangential velocity of the semi-circular inlet is 16.0% higher than that of the square

and the circular shape is reduced by 15.3%. The average value of the centrifugal force of the semi-circular inlet is increased by 59.9% and the circle is reduced by 43.5% than the square in the near wall. 97% of the particles Reynolds number is in the range of 40—400

and the number of particles with

= 80 is the highest for three inlets. The particl

es are affected by the concave-wall jet

the impact and rolling is formed between the discrete particles and the wall. The first impact is in the range of 10°—35° in the inlet circumferential direction

the maximum wall shear stress appears to be flat. The wall shear stress gradually approaches zero after the particles roll along the wall surface and the circumferential direction exceeds 90°. After calculations

the turbulence intensity increased 27.1%

8.8%

and 62.7%

and the wall shear stress increased 23.7%

13.5%

and 15.2% for square

semi-circular and circular inlet

respectively.

关键词

Keywords

references

吴彦 . 一种工业废水重金属去除的方法: 201410556202.4 [P ] . 2015-02-25 .

Wu Y . A method for removing heavy metals from industrial waste water: 201410556202.4 [P ] . 2015-02-25 .

孙铭 , 钟姣姣 , 杨叶伟 . 一种煤焦油脱渣和馏分分离工艺与装置: 201710237562.1 [P ] . 2017-07-25 .

Sun M , Zhong J J , Yang Y W . The utility model relates to a coal tar desulfurization and distillation separation process and device: 201710237562.1 [P ] . 2017-07-25 .

余国琮 . 化工机械工程手册 [M ] . 北京 : 化学工业出版社 , 2003 : 22 - 28 .

Yu G C . Chemical Mechanical Engineering Manual [M ] . Beijing : Chemical Industry Press , 2003 : 22 - 28 .

张静 , 刘晓亮 , 龚斌 , 等 . 挡板的相对曲率对分离器入口局域流场流体力学性能的影响 [J ] . 化工进展 , 2017 , 36 ( 11 ): 3963 - 3970 .

Zhang J , Liu X L , Gong B , et al . Effect of inlet baffle curvature ratio on the local flow fields in a separator [J ] . Chemical Industry and Engineering Progress , 2017 , 36 ( 11 ): 3963 - 3970 .

王剑刚 , 张艳红 , 白兆圆 , 等 . 进口尺寸对旋转流场分离特征的影响 [J ] . 化工学报 , 2014 , 65 ( 1 ): 205 - 212 .

Wang J G , Zhang Y H , Bai Z Y , et al . Effects of inlet size on separation flow field inside hydrocyclone [J ] . CIESC Journal , 2014 , 65 ( 1 ): 205 - 212 .

Sha J , Lei H N , Wang M D , et al . Comparison of separation performance of liquid-solid fluidized bed separator and dense medium cyclone for cleaning coal [J ] . International Journal of Coal Preparation and Utilization , 2018 , 38 : 98 - 106 .

Li J Y , Wang T , Sun Z H , et al . Treatment of high arsenic content lead copper matte by a pressure oxidative leaching combined with cyclone and vertical electro-deposition method [J ] . Separation and Purification Technology , 2018 , 199 : 282 - 288 .

Yan Y J , Shang Y X , Wang Z C , et al . The structure design and numerical simulation research on downhole hydrocyclone desander [J ] . Advanced Materials Research , 2014 , 933 : 434 - 438 .

Hiraiwa Y , Oshitari T , Fukui K , et al . Effect of free air inflow method on fine particle classification of gas-cyclone [J ] . Separation and Purification Technology , 2013 , 118 : 670 - 679 .

王帅 , 罗坤 , 杨世亮 , 等 . 旋风分离器内气固两相流动特性的LES-DEM研究 [J ] . 工程热物理学报 , 2016 , 37 ( 2 ): 342 - 346 .

Wang S , Luo K , Yang S L , et al . LES-DEM investigation of the gas-solid flow characteristics in a cyclone separator [J ] . Journal of Engineering Thermophysics , 2016 , 37 ( 2 ): 342 - 346 .

Song C M , Pei B B , Jiang M T , et al . Numerical analysis of forces exerted on particles in cyclone separators [J ] . Powder Technology , 2016 , 294 : 437 - 448 .

路展民 , 杨秀芝 . 垂直湍流液-固流中大颗粒的相对速度 [J ] . 力学学报 , 1999 , 31 ( 1 ): 29 - 37 .

Lu Z M , Yang X Z . The relative velocity of large particles in a vertical turbulent flow [J ] . Acta Mechanica Sinica , 1999 , 31 ( 1 ): 29 - 37 .

尹则高 , 王振鲁 , 张黎 , 等 . 静水中大雷诺数球形颗粒变加速沉降的理论分析与试验 [J ] . 水利水电科技进展 , 2016 , 36 ( 2 ): 6 - 9 .

Yin Z G , Wang Z L , Zhang L , et al . Theoretical analysis and experimental study of accelerating settlement of a spherical particle in still water with high Reynolds number [J ] . Advances in Science and Technology of Water Resources , 2016 , 36 ( 2 ): 6 - 9 .

Aponte R D , Teran L A , Ladino J A , et al . Computational study of the particle size effect on a jet erosion wear device [J ] . Wear , 2017 , 374 / 375 : 97 - 103 .

Lin N , Arabnejad H , Shirazi S A , et al . Experimental study of particle size, shape and particle flow rate on erosion of stainless steel [J ] . Powder Technology , 2018 , 336 : 70 - 79 .

Nagendra S V H , Prasant N , Bhagavanulu D V S . Numerical study of 3-dimensional wall jet on curved surfaces [J ] . International Journal of Applied Engineering Research , 2017 , 12 ( 16 ): 5604 - 5609 .

Kobayashi R , Fujisawa N . Curvature effects on two-dimensional turbulent wall jets [J ] . Ingenieur-Archiv , 1983 , 53 ( 6 ): 409 - 417 .

Kobayashi R , Fujisawa N . Turbulence measurements in wall jets along strongly concave surfaces [J ] . Acta Mechanica , 1983 , 47 : 39 - 52 .

王振波 , 马艺 , 金有海 . 导叶式旋流器内油滴的聚结破碎及影响因素 [J ] . 化工学报 , 2011 , 62 ( 2 ): 399 - 406 .

Wang Z B , Ma Y , Jin Y H . Droplet coalescence and breakup and its influence factors in vane-guided hydrocyclone [J ] . CIESC Journal , 2011 , 62 ( 2 ): 399 - 406 .

Naqavi I Z , Tyacke J C , Tucker P G . Direct numerical simulation of a wall jet: flow physics [J ] . J. Fluid Mech ., 2018 , 852 : 507 - 542 .

Hopfinger E J ， Kurniawan A ， Graf W H , et al . Sediment erosion by Görtler vortices: the scour-hole problem [J ] . J. Fluid Mech ., 2004 , 520 : 327 - 342 .

夏密 , 李昳 , 李凤琴 . 固液两相流离心泵内颗粒运动规律的数值研究 [J ] . 机电工程 , 2015 , 32 ( 12 ): 1555 - 1563 .

Xia M , Li Y , Li F Q . Numerical simulation of solid phase movement and distribution in the solid-liquid two-phase flow centrifugal pump [J ] . Journal of Mechanical ＆ Electrical Engineering , 2015 , 32 ( 12 ): 1555 - 1563 .

赵宪萍 , 叶桂林 , 孙坚荣 . 电厂飞灰颗粒粒径对冲蚀磨损性能影响的试验研究 [J ] . 上海电力学院学报 , 2018 , 34 ( 2 ): 101 - 105 .

Zhao X P , Ye G L , Sun J R , et al . Experimental study on the influence of flying-ash erosion characteristic with the particle size [J ] . Journal of Shanghai University of Electric Power , 2018 , 34 ( 2 ): 101 - 105 .

袁惠新 , 吕浪 , 殷伟伟 , 等 . 不同入口形式的固液分离旋流器壁面磨损研究 [J ] . 化工进展 , 2015 , 34 ( 10 ): 3583 - 3588 .

Yuan H X , Lyu L , Yin W W , et al . Numerical simulation of the wall attrition in solid-liquid separation cyclone with different inlet forms [J ] . Chemical Industry and Engineering Progress , 2015 , 34 ( 10 ): 3583 - 3588 .

杨晓洪 , 张政 . 幂律流体在半圆及扁圆形通道中充分发展流动数值分析与阻力计算 [J ] . 北京化工学院学报 , 1992 , 19 ( 2 ): 1 - 6 .

Yang X H , Zhang Z . Numerical simulation and f Re s correlation for fully developed flow of power law fluid through a semicircular duet and flat circular duct [J ] . Journal of Beijing Institute of Chemical Technology , 1992 , 19 ( 2 ): 1 - 6 .

Ylikangas A M . Method and apparatus for separating multiphase fluids and applications thereof: AU-A-2009210880 [P ] . 2009-01-02 .

Hreiz R , Gentric C , Midoux N . Numerical investigation of swirling flow in cylindrical cyclones [J ] . Chemical Engineering Research and Design , 2011 , 89 ( 12 ): 2521 – 2539 .

王明波 , 王瑞和 . 磨料水射流中磨料颗粒的受力分析 [J ] . 中国石油大学学报(自然科学版) , 2006 , 30 ( 4 ): 47 - 49 .

Wang M B , Wang R H . Analysis of forces acting on abrasive particles in abrasive water jet [J ] . Journal of China University of Petroleum , 2006 , 30 ( 4 ): 47 - 49 .

Zhang S Y , Bogy D . Effects of lift on the motion of particles in the recessed regions of a slider [J ] . Physics of Fluids , 1997 , 9 ( 5 ): 1265 - 1272 .

覃文洁 , 胡春光 , 郭良平 , 等 . 近壁面网格尺寸对湍流计算的影响 [J ] . 北京理工大学学报 , 2006 , 26 ( 5 ): 388 - 392 .

Qin W J , Hu C G , Guo L P , et al . Effect of near-wall grid size on turbulent flow solutions [J ] . Transactions of Beijing Institute of Technology , 2006 , 26 ( 5 ): 388 - 392 .

Zhang S J , Liu J J , Chen Y S . Adaptation for hybrid unstructured grid with hanging node method [C ] // 15th AIAA Computational Fluid Dynamics Conference. USA , 2001 .

Ariff M , Salim S M , Cheah S C . Wall y+ approach for dealing with turbulence flow over a surface mounted cube（Ⅱ）: High Reynolds number [C ] //Proceedings of the Seventh International Conferenceon CFD in the Minerals and Process Industries CSIRO. Melbourne, Australia , 2009 .

Mathai V , Prakash V N , Brons J , et al . Wake-driven dynamics of finite-sized buoyant spheres in turbulence [J ] . Physical Review Letters , 2015 , 115 : 124501 .

Yarin L P , Hetsroni G . Turbulence intensity in dilute two-phase flows(3): The particles-turbulence interaction in dilute two-phase flow [J ] . Int . J . Multiphase Flow , 1994 , 20 ( 1 ): 27 - 44 .

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Flow characteristics of three-dimensional concave-wall jet

Numerical simulation of mono-disperse droplet spray dryer under influence of swirling flow

New universal corresponding state equation for correlation and extrapolation of saturated vapor-liquid density

Thermal analysis of phase change suspension jet impinging on wall surface covered with variable-shape porous layer

Construction of transition metal-based nitrogen-doped carbon and their desulfurization performance

Related Author

ZHANG Jing

ZHOU Yuanyuan

GONG Bin

LI Yaxia

LIU Hailiang

WU Jianhua

YANG Shujun

WEI Yucong

Related Institution

Center of New Chemical Technology Transfer and Promotion of Liaoning Province，Shenyang University of Chemical Technology

Australia Joint Research Center in Future Dairy Manufacturing, School of Chemical and Environmental Engineering, College of Chemistry, Chemical Engineering and Materials Science, Soochow University,,, China

Department of Chemical Engineering, Faculty of Engineering, Monash University, Clayton Campus

⁰