On the Use of the Fast Fourier TransformAlgorithm for Studies on Liquid Backmixingin Three-Phase Fluidized Beds

胡宗定; 赵学明

您当前的位置：

首页 >

文章列表页 >

On the Use of the Fast Fourier TransformAlgorithm for Studies on Liquid Backmixingin Three-Phase Fluidized Beds

更新时间：2025-12-16

- On the Use of the Fast Fourier TransformAlgorithm for Studies on Liquid Backmixingin Three-Phase Fluidized Beds
- CIESC Journal Issue 3, (1985)
- 作者机构：
  
  天津大学化工系,天津大学化工系
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：25 September 1985，
  
  Published：25 September 1985
- 稿件说明：
移动端阅览
胡宗定, 赵学明. On the Use of the Fast Fourier TransformAlgorithm for Studies on Liquid Backmixingin Three-Phase Fluidized Beds[J]. CIESC Journal, 1985, (3).
DOI：

胡宗定, 赵学明. On the Use of the Fast Fourier TransformAlgorithm for Studies on Liquid Backmixingin Three-Phase Fluidized Beds[J]. CIESC Journal, 1985, (3). DOI：

摘要

时间域最小二乘法分析在所有参数估计技术中是最可靠的

但计算工作量代价很高.本文在参数估计中采用3FFT算法进行卷积积分的计算

从而大大缩短了参数估计的计算时间.在三相流化床内

研究了气、液流速

液体的粘度和表面张力对液相返混的影响

得出了相应的关联式.

Abstract

Among all techniques for parameter estimation

the leastsquares analysis in the time domain is the most reliable

but the computational labor is often considered to be prohibitive. In this paper the authors have employed the FFT algorithm for the computation of the convolution integral

thus greatly shortening the computer time for parameter estimation. Liquid backmixing was investigated in a 92 mm I. D. threephase fluid-ized bed with the following conditions: gas velocity Ug 0.9-5.5cm/s

liquid velocity Ul 0.2 - 8.3cm/s. liquid kinematic viscosity r 0.81 - 39.6mm2/s

liquid surface tension a 39.7- 72.0mN/m and particle size 1.0- 1.25mm. Experimental results were correlated as follows: where Pe is the Peclet number. The mean deviation of the correlation is 15%.

关键词

Keywords

references

Views

504

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Performance analysis and application of thermal and humidity control system cascade driven by waste heat

Thermal analysis of phase change suspension jet impinging on wall surface covered with variable-shape porous layer

Zn-doped PdO/ZrO2 with rich oxygen vacancies for the synthesis of diphenyl carbonate from CO2 and phenol

The impact of novel flow channel structure with sudden-expansion ratio on seawater-activated battery

Multi objective optimization of flow and heat transfer characteristics of modified manifold microchannel heat sink based on machine learning

Related Author

No data

Related Institution

No data

⁰