The flow of grannular solids through apertures has been studied under the followingthree conditions: (1) with no pressure differential
(2) under positive pressure differential and (3) under negative pressure differential. The influence of various related factors upon the solid flow rate has been measured. Based upon the correlation of 665 sets of data obtained the following equations for calculating solid flow rate and sealing pressure difference gradient of vertical stand-pipe. With no pressure differential : C1 - 0.66. when G0 expressed in [kg/cek] Under positive pressure differential : C2 = 2.3×10~4 when (G1 - G0) expressed in [kg/cek]. Under negative pressure differential (before the critical point) : for sand C3 - 5.04
for coal C3 = 9.84 The sealing pressure difference gradient of vertical stand-pipe :
Study on dissolution kinetics of erythromycin thiocyanate
Performance study of gas-liquid vortex separators under low cross-sectional gas velocity
Experimental study of heat transfer enhancement by pressure waves in cross flow tube bundles
Controlled synthesis of Bi2MoO6/MoO3 composite fibers via in-situ hydrothermal method and their high-efficiency photocatalytic hydrogen production performance
Zn-doped PdO/ZrO2 with rich oxygen vacancies for the synthesis of diphenyl carbonate from CO2 and phenol