Simulation on heat and mass transfer of fluid flow boiling in metal foam

朱禹

您当前的位置：

首页 >

文章列表页 >

Simulation on heat and mass transfer of fluid flow boiling in metal foam

更新时间：2025-12-10

- Simulation on heat and mass transfer of fluid flow boiling in metal foam
- CIESC Journal Issue S2, (2010)
- 作者机构：
  
  上海交通大学制冷与低温工程研究所,上海,200240
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：30 December 2010，
  
  Published：30 December 2010
- 稿件说明：
移动端阅览
朱禹. Simulation on heat and mass transfer of fluid flow boiling in metal foam[J]. CIESC Journal, 2010, (S2).
DOI：

朱禹. Simulation on heat and mass transfer of fluid flow boiling in metal foam[J]. CIESC Journal, 2010, (S2). DOI：

摘要

为了了解泡沫金属内流体流动沸腾热质传递机理，建立了泡沫金属内流体流动沸腾的理论模型。建模中采用Mixture多相流模型，通过引入泡沫金属的渗透率、有效热导率等参数，以体现泡沫金属区别于传统多孔介质的特点；通过在动量方程中增加达西项与惯性力项以体现泡沫金属对两相流动中动量传递的影响；通过增加固体能量方程，并与流体能量方程耦合，以体现泡沫金属内传热过程的热不平衡性。将本文建立的理论模型与已有文献中的数据进行对比，结果表明模型预测值和已有的实验数据吻合较好。

Abstract

Mathematical model of fluid flow boiling in metal foam is established，in order to understand the heat and mass transfer mechanisms of flow boiling in metal foam.Mixture multiphase flow model is used in this paper.The permeability model and effective thermal conductivity model of metal foam is introduced in the present model，in order to reflect the different characteristic of metal foam from that of traditional porous media.The Darcy term and inertial term are introduced in the present model，in order to reflect the influence of metal foam on momentum transfer of the fluid.The energy conservation equation of solid phase is added to the present model by coupling the energy conservation equation of fluid phase，in order to reflect the thermal non equilibrium phenomena of heat transfer in metal foam.The calculation results of the present model agrees well with the experimental results in the open literature.

关键词

Keywords

references

Views

1252

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Heat transfer mechanisms, bottleneck identification and optimization in heat exchanger networks under variable operating conditions

Experimental study of heat transfer enhancement by pressure waves in cross flow tube bundles

Study on performance enhancement and cold retention characteristics of solid packed bed cold energy storage

Study on microstructure of NaCl solution ice centrifugal separation based on Micro-CT and deep learning

Engineering verification and NO emission control of rare earth Y2O3-based catalytic coatings on a metal fiber surface burner

Related Author

No data

Related Institution

No data

⁰