Modeling and simulation of vacuum evaporation from surface of a continuous falling liquid column

张峰榛

您当前的位置：

首页 >

文章列表页 >

Modeling and simulation of vacuum evaporation from surface of a continuous falling liquid column

更新时间：2025-12-10

- Modeling and simulation of vacuum evaporation from surface of a continuous falling liquid column
- CIESC Journal Issue 12, (2011)
- 作者机构：
  
  四川大学化学工程学院,四川,成都,610065
- 作者简介：
- 基金信息：
- DOI：
  CLC： 0.3969/j.issn.0438-1157.2011.12.003
- Online First：05 December 2011，
  
  Published：05 December 2011
- 稿件说明：
移动端阅览
张峰榛. Modeling and simulation of vacuum evaporation from surface of a continuous falling liquid column[J]. CIESC Journal, 2011, (12).
DOI：

张峰榛. Modeling and simulation of vacuum evaporation from surface of a continuous falling liquid column[J]. CIESC Journal, 2011, (12). DOI：

摘要

真空条件下连续液柱流表面蒸发现象及模型表达是低能耗汽-液分离过程设计的重要基础。研究了重力作用下通过孔口的连续液柱流条件，获得了液柱断裂的判据。研究了该体系表面蒸发的机理并建立了数学模型。数值模拟与实验数据较为吻合，结果表明：绝热闪蒸条件下，汽液相界面附近液相侧温度梯度显著，过程阻力主要在液相；增加孔口流速、增加液体过热度、减小孔径均可提高蒸发速率，但必须满足液柱断裂判据的限制。

Abstract

Modeling and simulation of vacuum evaporation from the surface of a continuous falling liquid column were carried out to obtain a mechanism-based prediction for application in energy-efficient vapor-liquid separation process.The parameters governing the continuous flow of falling liquid column out-of an orifice were investigated to determine the critical conditions for breakup of the liquid column.The mechanism of evaporation from the free surface of liquid column was analyzed and a mathematical model of the system was set up.The simulation results were in good agreement with the experimental data.In an adiabatic flash vaporization

the temperature gradient near the interface on the liquid side was a sensitive indicator of evaporation rate.This means that the resistance of heat transfer mainly lies in the liquid phase

so that the evaporation rate can be enhanced by increasing the liquid velocity out-of the orifice and narrowing the orifice diameter but without the breakup of liquid column

or increasing the degree of superheat.

关键词

Keywords

references

Views

1431

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Effect of belt structure design on the vulcanization characteristics of all-steel radial tires

Identification of gas-liquid two-phase flow patterns in a riser based on recursive characteristics and CNN

Study on dissolution kinetics of erythromycin thiocyanate

Study on the residence time distribution characteristics of the TPMS-Diamond static mixer

Multi objective optimization of flow and heat transfer characteristics of modified manifold microchannel heat sink based on machine learning

Related Author

No data

Related Institution

No data

⁰