Influences of air pipe parameters on thermal working conditions in carbon rotary kilns

陈文仲

您当前的位置：

首页 >

文章列表页 >

Influences of air pipe parameters on thermal working conditions in carbon rotary kilns

更新时间：2025-12-10

- Influences of air pipe parameters on thermal working conditions in carbon rotary kilns
- CIESC Journal Issue 11, (2011)
- 作者机构：
  
  1. 东北大学材料与冶金学院
  2. 辽宁石油化工大学石油天然气工程学院
  3. 沈阳远大铝业集团
- 作者简介：
- 基金信息：
- DOI：
  CLC： 0.3969/j.issn.0438-1157.2011.11.019
- Online First：05 November 2011，
  
  Published：05 November 2011
- 稿件说明：
移动端阅览
陈文仲. Influences of air pipe parameters on thermal working conditions in carbon rotary kilns[J]. CIESC Journal, 2011, (11).
DOI：

陈文仲. Influences of air pipe parameters on thermal working conditions in carbon rotary kilns[J]. CIESC Journal, 2011, (11). DOI：

摘要

以2.3 m×55 m的炭素回转窑作为研究对象，应用流体模拟软件Fluent 和Matlab 分别对其气体空间和物料料层内的传热过程进行了研究。通过改变二、三次供风管的长度和供风管入口处的空气吹向，得到了相应条件下窑内的温度分布，并进行了比较和分析。结果表明：二、三次供风管的长度对窑内温度场的影响较小，实践中可以采用无管供风措施，以解决供风管道烧损问题；当二、三次供风管在某一长度下窑内煅烧带温度较高时，其窑内剩余的可燃气体较低；二、三次供风管入口处空气均吹向窑头时，窑尾处剩余可燃气体浓度较大，但其煅烧带温度较高，煅烧带长度较长；当二、三次供风管入口处空气均吹向窑尾时，窑尾处剩余可燃气体浓度较小，但其煅烧带温度较低，煅烧带长度较短。

Abstract

Taking a 2.3 m×55 m carbon rotary kiln for example

numerical simulations were conducted on gas and solid spaces of the kiln by using Fluent and Matlab softwares. Through changing air pipe length and air flow of secondary and tertiary air

temperature field distributions and gas concentration distributions were obtained under different conditions. The results indicated that air pipe length had insignificant influence on kiln temperature

so air could be supplied without pipe in practical engineering to resolve the burning out of air pipe. When the length of air pipe equaled a specific value

kiln temperature was up to a higher temperature. At the same time

the concentration of the remaining combustible gas was lower under that condition. As the secondary and tertiary air flowed to the kiln outlet

the remaining combustible gas was higher at the kiln inlet

but the temperature of the calcining zone was higher

and the length of the calcining zone was longer. Conversely

the remaining combustible gas was lower at the kiln inlet

the temperature of the calcining zone was lower

and the length of the calcining zone was shorter as the secondary and tertiary air flowed to the kiln inlet.

关键词

Keywords

references

Views

894

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study on dissolution kinetics of erythromycin thiocyanate

Progress of solar photo-thermo-catalysis for ammonia synthesis and decomposition under mild conditions

Construction of transition metal-based nitrogen-doped carbon and their desulfurization performance

Study on the residence time distribution characteristics of the TPMS-Diamond static mixer

Oxygen mass transfer performance of hollow fiber non-bubble aeration membrane based on gas/liquid-phase measurement method

Related Author

No data

Related Institution

No data

⁰