CTAB逆胶束体系中Lipex脂肪酶催化合成油酸乙酯

GAO Jing; LI Weijie; TAN Wenli; HE Ying

您当前的位置：

首页 >

文章列表页 >

CTAB逆胶束体系中Lipex脂肪酶催化合成油酸乙酯

更新时间：2025-12-10

- CTAB逆胶束体系中Lipex脂肪酶催化合成油酸乙酯
- CIESC Journal Issue 12, (2007)
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：05 December 2007，
  
  Published：05 December 2007
- 稿件说明：
移动端阅览
GAO Jing, LI Weijie, TAN Wenli, et al. CTAB逆胶束体系中Lipex脂肪酶催化合成油酸乙酯[J]. CIESC Journal, 2007, (12).
DOI：

GAO Jing, LI Weijie, TAN Wenli, et al. CTAB逆胶束体系中Lipex脂肪酶催化合成油酸乙酯[J]. CIESC Journal, 2007, (12). DOI：

摘要

研究了CTAB逆胶束体系的适宜构建条件以及Lipex脂肪酶催化合成油酸乙酯的适宜反应条件。探讨了有机溶剂、底物配比、pH值、水含量W0、酸浓度、反应时间等因素对反应的影响。研究表明，在以CTAB为表面活性剂时，以异辛烷为溶剂，正己醇作助溶剂条件下，能得到较为稳定的逆胶束体系，更有利于Lipex脂肪酶的活性发挥;在该反应体系下反应温度25 ℃，缓冲液pH7. 0，W010，酸醇比1∶4（摩尔比），油酸浓度0. 01 mol·L-1，摇床转速150 r·min-1，反应36 h，油酸乙酯产率达到79%。并建立了逆胶束体系中双底物作用的动力学模型，经验证模拟计算结果与实验结果吻合良好。

Abstract

The optimal conditions of cetyl trimethyl ammonium bromide (CTAB) reverse micellar system

and the most suitable reaction conditions of synthesis of ethyl oleate by Lipex lipase were determined. The influences of organic solvent

ratio of substrates

pH value

water content W0

concentration of oleic acid and reaction time were investigated. As a result

a more stable reverse micellar system was obtained

which led to a better activity of Lipex lipase. The parameters in this condition were optimized as follows: reaction temperature 25 ℃

buffer pH value 7. 0

W0 10

ratio of acid to ethanol 1∶4

oleic acid concentration 0. 01 mol·L-1

agitation speed 150 r·min-1 and reaction time 36 h

and the yield of ethyl oleate was 79%. The kinetic model of the reverse micellar system influenced by double substrates was established. The simulated result agreed well with the experimental result.

关键词

Keywords

references

Views

501

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Thermodynamic performance of tower-type solar-assisted supercritical compression CO2 energy storage system

Recent advances in machine learning for modeling and control of crystallization processes

Multi objective optimization of flow and heat transfer characteristics of modified manifold microchannel heat sink based on machine learning

Controlled synthesis of Bi2MoO6/MoO3 composite fibers via in-situ hydrothermal method and their high-efficiency photocatalytic hydrogen production performance

Thermo-gas-elastic coupling performance analysis of high-speed and high-temperature foil face seals

Related Author

No data

Related Institution

No data

⁰