Treatment of wastewater from benzyl alcohol production with resin adsorption
|更新时间:2025-12-10
|
Treatment of wastewater from benzyl alcohol production with resin adsorption
CIESC JournalIssue 5, (2007)
作者机构:
1. 南京林业大学环境工程系
2. 南京大学污染控制与资源化研究国家重点实验室
作者简介:
基金信息:
DOI:
CLC:
Online First:05 May 2007,
Published:05 May 2007
稿件说明:
移动端阅览
CHEN Yiliang, PAN Bingcai, ZHANG Quanxing. Treatment of wastewater from benzyl alcohol production with resin adsorption[J]. CIESC Journal, 2007, (5).
DOI:
CHEN Yiliang, PAN Bingcai, ZHANG Quanxing. Treatment of wastewater from benzyl alcohol production with resin adsorption[J]. CIESC Journal, 2007, (5).DOI:
Treatment of wastewater from benzyl alcohol production with resin adsorption
An adsorption process to treat the wastewater from benzyl alcohol production with hyper-crosslinked macropore resin was studied.The factors
including pH
temperature
flow rate
desorption reagent
etc.that influenced the adsorption-desorption process were investigated.Based on the investigation
the process parameters for the treatment were optimized.The results showed the hyper-crosslinked macropore resin JX-101 exhibited excellent adsorption-desorption performance for benzyl alcohol.Through the fixed-bed adsorption process under optimal conditions
the concentration of benzyl alcohol in the wastewater was reduced from 14000 mg·L-1 to 25 mg·L-1 and COD was reduced from 34000 mg·L-1 to less than 100 mg·L-1.The removal rate of benzyl alcohol and COD was over 99%,and the effluent quality met National Discharge StandardⅠ.Furthermore
benzyl alcohol in the wastewater could be recovered
with purity of 85%.The process is convenient and could be steadily run
which provides the experimental basis for the treatment and resource reuse of benzyl alcohol production wastewater.