Flow regime identification of oil-water two-phase flow based on HHT and SVM

马龙博 张宏建 周洪亮 贺庆

您当前的位置：

首页 >

文章列表页 >

Flow regime identification of oil-water two-phase flow based on HHT and SVM

更新时间：2025-12-10

- Flow regime identification of oil-water two-phase flow based on HHT and SVM
- CIESC Journal Issue 3, (2007)
- 作者机构：
  
  浙江大学控制科学与工程学系，工业控制技术国家重点实验室自动化仪表所
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：05 March 2007，
  
  Published：05 March 2007
- 稿件说明：
移动端阅览
马龙博张宏建周洪亮贺庆. Flow regime identification of oil-water two-phase flow based on HHT and SVM[J]. CIESC Journal, 2007, (3).
DOI：

马龙博张宏建周洪亮贺庆. Flow regime identification of oil-water two-phase flow based on HHT and SVM[J]. CIESC Journal, 2007, (3). DOI：

摘要

针对油水两相流的测量难题，利用文丘里管对水平管内油水两相流流型进行了研究。基于差压波动信号，提出了Hilbert-Huang变换与支持向量机相结合的流型识别方法。首先计算差压波动信号的均方根，并对其进行归一化处理后作为表征流型的特征向量之一；然后对差压信号进行Hilbert-Huang变换，利用经验模态分解后的多分辨率特征，提取第一层和第二层的能量比作为表征流型的另外两个特征向量；最后利用训练好的支持向量机进行流型识别，对分层流型及分散流型取得了较好的流型识别效果。如果将流型识别与推导得到的文丘里油水两相流流量测量模型相结合，可以较好地实现油水两相流的流量测量。

Abstract

To overcome the difficulties in measuring the oil-water two-phase flow

the oil-water two-phase flow regime was studied with a horizontal Venturi tube and a model of flow measurement was established.A flow regime identification method combining Hilbert-Huang transform (HHT) with support vector machine (SVM) was developed

based on the differential pressure signals obtained from the Venturi tube.With this method

the root mean square of the differential pressure signal was calculated and used as one of the characteristic vectors after it was normalized.Meanwhile

the differential pressure signal was handled with Hilbert-Huang transform.The energy ratios of the first and the second layers were obtained as the other two characteristic vectors closely associated with the flow regime

by using the multi-resolution feature of the empirical mode analysis.Then

the flow regime was identified with SVM

and better results were obtained.The oil-water flow measurement could be better made if flow regime identification was combined with the model of the oil-water two-phase flow measurement using a Venturi tube.

关键词

Keywords

references

Views

399

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study on impact of impurities in coal chemical waste salt on solvation of NaCl and Na2SO4

Performance analysis and application of thermal and humidity control system cascade driven by waste heat

Construction of transition metal-based nitrogen-doped carbon and their desulfurization performance

Corrosion health status assessment method for refining unit pipeline based on GLAE-MLP

Performance of alkali metal-loaded SrMnO3 oxygen carriers in chemical looping oxidative dehydrogenation of ethylbenzene

Related Author

No data

Related Institution

No data

⁰