Preparation of ZrO2（3Y）encapsulated Al2O3 nanometer composite powders

YANG Jian; LIU Jiao; QIU Tai; LIN Jie

您当前的位置：

首页 >

文章列表页 >

Preparation of ZrO₂（3Y）encapsulated Al₂O₃ nanometer composite powders

更新时间：2025-12-10

- Preparation of ZrO₂（3Y）encapsulated Al₂O₃ nanometer composite powders
- CIESC Journal Issue 8, (2006)
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：25 August 2006，
  
  Published：25 August 2006
- 稿件说明：
移动端阅览
YANG Jian, LIU Jiao, QIU Tai, et al. Preparation of ZrO₂（3Y）encapsulated Al₂O₃ nanometer composite powders[J]. CIESC Journal, 2006, (8).
DOI：

YANG Jian, LIU Jiao, QIU Tai, et al. Preparation of ZrO₂（3Y）encapsulated Al₂O₃ nanometer composite powders[J]. CIESC Journal, 2006, (8). DOI：

摘要

以pH值缓冲溶液为沉淀剂，用非均匀成核和液相共沉淀相结合的方法合成出了ZrO2（3Y）包裹Al2O3纳米复合粉体.用XRD、TEM对所制备粉体进行了表征.研究表明：加入分散剂使Al2O3悬浮液的等电点向酸性区移动，Zeta电位绝对值增大，其中pH值为9.56对应的Zeta电位绝对值最大，悬浮液最稳定.Al2O3悬浮液pH值为9.5，ZrOCl2和YCl3混合溶液浓度为0.2 mol8226;L-1时前驱体的收得率最高.600℃煅烧后得到的粉体中只有α-Al2O3、t-ZrO2两种物相，在Al2O3颗粒表面附着10 nm左右的ZrO2（3Y）颗粒.

Abstract

ZrO2（3Y）encapsulated Al2O3 nano composite powders were prepared by heterogeneous nucleation combined with the liquid co-deposition method using pH buffer solution as precipitator.The synthesized powders were characterized with XRD and TEM.The results indicated that the isoelectric point of Al2O3 suspension shifted to acidic side and the absolute value of Zeta potential also increased when a dispersant was added into the suspension.At pH 9.56，the absolute value of Zeta potential reached the maximum and the suspension was most stable.The maximum yield of the precursor was obtained at pH 9.5 and the concentration of ZrOCl2and YCl3mixed solution 0.2 mol8226;L-1.There existed two phases，i.e.，α-Al2O3 and t-ZrO2，in the composite powders calcined at 600℃.TEM observation confirmed that nano ZrO2（3Y）particles with a diameter of 10 nm were formed on the surface of Al2O3 particles.

关键词

Keywords

references

Views

302

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Effect of belt structure design on the vulcanization characteristics of all-steel radial tires

Exothermic characteristics of energy carrier for calcium looping thermo-chemical energy storage

Performance of alkali metal-loaded SrMnO3 oxygen carriers in chemical looping oxidative dehydrogenation of ethylbenzene

The impact of novel flow channel structure with sudden-expansion ratio on seawater-activated battery

A hybrid modeling and optimization strategy for sequential simulated moving bed

Related Author

No data

Related Institution

No data

⁰