Particle morphology of syndiotactic polystyrene prepared with homogeneous metallocene catalyst

LI Bogeng; YU Bo; FAN Rong; LIU Wei; CAO Kun

您当前的位置：

首页 >

文章列表页 >

Particle morphology of syndiotactic polystyrene prepared with homogeneous metallocene catalyst

更新时间：2025-12-10

- Particle morphology of syndiotactic polystyrene prepared with homogeneous metallocene catalyst
- CIESC Journal Issue 8, (2006)
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：25 August 2006，
  
  Published：25 August 2006
- 稿件说明：
移动端阅览
LI Bogeng, YU Bo, FAN Rong, et al. Particle morphology of syndiotactic polystyrene prepared with homogeneous metallocene catalyst[J]. CIESC Journal, 2006, (8).
DOI：

LI Bogeng, YU Bo, FAN Rong, et al. Particle morphology of syndiotactic polystyrene prepared with homogeneous metallocene catalyst[J]. CIESC Journal, 2006, (8). DOI：

摘要

以均相单茂钛化合物［Cp*Ti(OPh)3 和Cp*Ti(OPhOMe)3］为主催化剂，配以烷基铝氧烷（MAO）和三异丁基铝(TIBA)，进行了苯乙烯的本体间规聚合.研究发现，聚合过程中生成聚合物的快速结晶对于避免反应体系的凝胶化，制得颗粒状产物十分重要.但正因为这种结晶成核机理，使所得颗粒的形貌极不规整，调控也十分困难.聚合过程中sPS种子的加入没有明显改善生成聚合物的颗粒形态.但当聚合体系中引入少量其他聚合物后，得到了较为规整的sPS颗粒，尤其当加入的聚合物与无定形sPS热力学不相容时（如mEPDM），得到了十分规则的球状颗粒.

Abstract

Syndiotactic polystyrene (sPS) was prepared by bulk polymerization with homogeneous metallocene catalystic system

Cp*Ti(OPh)3 or Cp*Ti(OPhOMe)3/MAO/TIBA.It was found that a fast crystallization of the produced sPS is very important to avoid gelation of the polymerizing mixture and prepare powdery product.But

it was due to crystallization nucleation mechanism that the morphology of produced particles was very irregular and extraordinarily difficult to manipulate.Adding a little sPS seed during polymerization did not improve particle morphology.However

regular particles with good morphology could be simply prepared by adding a little other polymer.When the added polymer (e.g. mEPDM) was immiscible with the amorphous sPS

spherical particles could be obtained.

关键词

Keywords

references

Views

286

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Mechanism and regulation of supercooling behavior in imidazolium-based ionic liquids

Recent advances and perspectives on sulfide-based photocatalysts for hydrogen production

Controlled synthesis of Bi2MoO6/MoO3 composite fibers via in-situ hydrothermal method and their high-efficiency photocatalytic hydrogen production performance

Study on flash evaporation characteristics as well as thermodynamic variation performance in liquid hydrogen tank during on-orbit venting

Study on dissolution kinetics of erythromycin thiocyanate

Related Author

No data

Related Institution

No data

⁰