等离子体射流裂解甲烷制乙炔的数值模拟

YU Hui; YIN Yongxiang; DAI Xiaoyan

您当前的位置：

首页 >

文章列表页 >

等离子体射流裂解甲烷制乙炔的数值模拟

更新时间：2025-12-10

- 等离子体射流裂解甲烷制乙炔的数值模拟
- CIESC Journal Issue 10, (2006)
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：25 October 2006，
  
  Published：25 October 2006
- 稿件说明：
移动端阅览
YU Hui, YIN Yongxiang, DAI Xiaoyan. 等离子体射流裂解甲烷制乙炔的数值模拟[J]. CIESC Journal, 2006, (10).
DOI：

YU Hui, YIN Yongxiang, DAI Xiaoyan. 等离子体射流裂解甲烷制乙炔的数值模拟[J]. CIESC Journal, 2006, (10). DOI：

摘要

针对漏斗形射流反应器中热等离子体法裂解天然气制乙炔的过程进行研究.采用k-ε双方程模型对体系中的传递过程进行模拟，并通过甲烷裂解系列反应的宏观动力学模型对反应过程进行耦合.运用CFD方法进行数值求解，得到了反应器内的速度场、浓度场、温度场和反应速率分布.研究结果表明，漏斗形结构有利于反应器中温度和浓度的良好混合，使得甲烷充分反应;甲烷与乙烯的裂解反应主要沿温度混合面进行，炭黑浓度则沿反应器轴向逐渐增多.对应于本反应器，在等离子体发生器功率为100 kW，甲烷体积流量为10 m3·h-1时，甲烷转化率和乙炔收率同时达到最大.模拟结果与实验数据吻合较好，验证了模型与模拟结果的合理性.

Abstract

Methane conversion to acetylene in a plasma jet reactor was studied.The k-ε two equations model was employed to simulate transport phenomena in the reactor

and macro kinetics of the series of pyrolysis reactions was introduced into the model.The coupled model of transport model and kinetics was calculated by using the CFD method

and distributions of velocity

mass fraction

temperature and reaction rates in the reactor were obtained.It was shown that the structure of funnel was beneficial to heat and mass transport to complete the pyrolysis of methane.Methane and ethylene were pyrolyzed mainly on the temperature mixing surface

and the mass fraction of carbon increased along the reactor axis.In this funnel reactor

when the power of plasma generator was 100 kW and the volume flow rate of methane was 10 m3·h-1

the conversion rate of methane reached 100% and the yield of acetylene reached the maximum also.The experimental results obtained were considerably consistent with the simulation results.

关键词

Keywords

references

Views

925

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study on flash evaporation characteristics as well as thermodynamic variation performance in liquid hydrogen tank during on-orbit venting

Study on microwave enhanced removal performance of organic matter in coking waste salt

Experimental study of heat transfer enhancement by pressure waves in cross flow tube bundles

Study on performance enhancement and cold retention characteristics of solid packed bed cold energy storage

Prediction of biomass pyrolysis product yield based on machine learning algorithms

Related Author

No data

Related Institution

No data

⁰