EXPERIMENTAL STUDY OF EXIT VELOCITY EFFECT ON HEAT TRANSFER WITH IMPINGING SUBMERGED CIRCULAR JETS AT STAGNATION POINT
|更新时间:2025-12-10
|
EXPERIMENTAL STUDY OF EXIT VELOCITY EFFECT ON HEAT TRANSFER WITH IMPINGING SUBMERGED CIRCULAR JETS AT STAGNATION POINT
CIESC JournalIssue 10, (2002)
作者机构:
北京工业大学环能学院
作者简介:
基金信息:
DOI:
CLC:
Online First:25 October 2002,
Published:25 October 2002
稿件说明:
移动端阅览
ZHOU Dingwei, MA Chongfang. EXPERIMENTAL STUDY OF EXIT VELOCITY EFFECT ON HEAT TRANSFER WITH IMPINGING SUBMERGED CIRCULAR JETS AT STAGNATION POINT[J]. CIESC Journal, 2002, (10).
DOI:
ZHOU Dingwei, MA Chongfang. EXPERIMENTAL STUDY OF EXIT VELOCITY EFFECT ON HEAT TRANSFER WITH IMPINGING SUBMERGED CIRCULAR JETS AT STAGNATION POINT[J]. CIESC Journal, 2002, (10).DOI:
EXPERIMENTAL STUDY OF EXIT VELOCITY EFFECT ON HEAT TRANSFER WITH IMPINGING SUBMERGED CIRCULAR JETS AT STAGNATION POINT
Experimental study was performed systematically to investigate heat transfer characteristics at the stagnation point from a simulated microelectronic chip of 5mm×5mm with impinging submerged circular jet
using R113 as the working fluid.Included are single-phase convective heat transfer
incipient boiling superheating
nucleate boiling heat transfer and burnout.The results showed that exit velocity had no influence on incipient boiling point and fully-developed nucleate boiling heat transfer curves
and that single-phase convective heat transfer coefficient and critical heat flux increased with enhanced jet exit velocity
while temperature overshoot decreased.While exit velocity was beyond 10m·s -1
the high heat flux portions of impingement boiling curves needed to be corrected in order to align with pool boiling curves at the same fluid subcooling.