TWO-DIMENSIONAL MODELING OF 1,2-DICHLOROETHANE CRACKING TUBULAR REACTOR

YANG Yongrong; CAO Bin

您当前的位置：

首页 >

文章列表页 >

TWO-DIMENSIONAL MODELING OF 1,2-DICHLOROETHANE CRACKING TUBULAR REACTOR

更新时间：2025-12-10

- TWO-DIMENSIONAL MODELING OF 1,2-DICHLOROETHANE CRACKING TUBULAR REACTOR
- CIESC Journal Issue 10, (2002)
- 作者机构：
  
  浙江大学化学工程与生物工程学系联合化学反应工程研究所
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：25 October 2002，
  
  Published：25 October 2002
- 稿件说明：
移动端阅览
YANG Yongrong, CAO Bin. TWO-DIMENSIONAL MODELING OF 1,2-DICHLOROETHANE CRACKING TUBULAR REACTOR[J]. CIESC Journal, 2002, (10).
DOI：

YANG Yongrong, CAO Bin. TWO-DIMENSIONAL MODELING OF 1,2-DICHLOROETHANE CRACKING TUBULAR REACTOR[J]. CIESC Journal, 2002, (10). DOI：

摘要

建立了二氯乙烷在管式反应器中进行气相热裂解的二维模型

模型考虑了二氯乙烷热解生成氯乙烯的主反应和生成焦前体的副反应以及气体密度变化对裂解反应的影响 .模拟计算表明

二氯乙烷和氯乙烯的浓度沿径向分布平坦 ;但是管内近壁面处由于存在边界层

始终存在着明显的径向温差 ;近管壁处始终是裂解的高速率区

副反应也主要发生在管壁区 .表明确定最优的炉管管径时必须考虑提高裂解速率与降低结焦速率之间的平衡 .在距进口量纲 1管程 0 .3左右的管壁处裂解速率达到最高 ;副反应速率的最大点位于出口管壁处 .与工业数据比较后发现

炉管出口的转化率、选择性、出口压力和温度等数据与模型预测值一致

表明模型具有较高的可信度

Abstract

A two-dimensional model is proposed for simulation of gas phase cracking of 1

2- dichloroethane (EDC) to produce vinyl chloride monomer(VCM) in tubular reactor furnace

in which side reaction of coke precursor formation is taken into consideration.It is found that significant radial variations of cracking temperature and cracking reaction rate exist due to boundary layer near the inner wall.The EDC cracking reaction rate is higher in the wall zone and reaches a maximum at 0.3 of dimensionless length of reactor coil.The rate of coke precursor formation is also higher near the inner wall than in the core zone of reactor coil and reaches a maximum at the outlet of reactor.The model can satisfactorily predict commercial operation results with regard to the EDC conversion

VCM selectivity

pressure and temperature at the outlet of reactor coil.

关键词

Keywords

references

Views

938

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study on synergistic modification of nitrogen-doped carbon coating and Ti⁴⁺ co-doping for lithium vanadium phosphate cathode materials

Thermal analysis of phase change suspension jet impinging on wall surface covered with variable-shape porous layer

Prediction of biomass pyrolysis product yield based on machine learning algorithms

Study on microstructure of NaCl solution ice centrifugal separation based on Micro-CT and deep learning

Progress in research of selective oxidation of low carbon polyols over nano-Au catalysts with precise electronic effect regulation

Related Author

No data

Related Institution

No data

⁰