GAS-SOLID TWO PHASE FLOW IN FEED INJECTION ZONE OF FCC RISER REACTORS (Ⅱ)ANALYTICAL RESEARCH

FAN Yiping; YE Sheng; LU Chunxi; SHI Mingxian

您当前的位置：

首页 >

文章列表页 >

GAS-SOLID TWO PHASE FLOW IN FEED INJECTION ZONE OF FCC RISER REACTORS (Ⅱ)ANALYTICAL RESEARCH

更新时间：2025-12-10

- GAS-SOLID TWO PHASE FLOW IN FEED INJECTION ZONE OF FCC RISER REACTORS (Ⅱ)ANALYTICAL RESEARCH
- CIESC Journal Issue 10, (2002)
- 作者机构：
  
  石油大学（北京）化学工程学院
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：25 October 2002，
  
  Published：25 October 2002
- 稿件说明：
移动端阅览
FAN Yiping, YE Sheng, LU Chunxi, et al. GAS-SOLID TWO PHASE FLOW IN FEED INJECTION ZONE OF FCC RISER REACTORS (Ⅱ)ANALYTICAL RESEARCH[J]. CIESC Journal, 2002, (10).
DOI：

FAN Yiping, YE Sheng, LU Chunxi, et al. GAS-SOLID TWO PHASE FLOW IN FEED INJECTION ZONE OF FCC RISER REACTORS (Ⅱ)ANALYTICAL RESEARCH[J]. CIESC Journal, 2002, (10). DOI：

摘要

针对提升管进料混合段这一复杂的混合流场建立了轴向颗粒返混模型

用以计算颗粒相返混比、轴向速度以及混合相密度等

从而将颗粒相的流动描述成单一参数控制的行为 .并根据多相流动的扩散模型和冷态实验的结果给出了射流相浓度在截面上分布规律的计算方法

指出该浓度分布主要与射流气速和预提升表观线速的速度比有关

而其他操作参数的影响都是次要的 .

Abstract

Fluid catalytic cracking (FCC) process is one of the most important heavy oil upgrading techniques in the petroleum refining industry

and riser reactor is the crucial part in FCC unit. An axial Particle Backmixing Model is established.By using two experimentally regressed parameters and the axial Particle Backmixing Model

the flow parameters of the particle phase such as mean density

mean axial velocity can be predicted well. The method for calculating radial distribution of nozzle jet in different riser cross-section is obtained

which considers both the Two Phases Diffusion Model and experimented results.It is also found that the ratio of pre-lift gas velocity and nozzle jet velocity is the decisive factor in this distribution while other operation parameters are secondary relatively.

关键词

Keywords

references

Views

206

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Methods of adaptive prediction and abnormal states traceability for sulphur content in flue gas desulfurization process

Prediction model for COD in petrochemical wastewater influent based on temporal-spatial dual-stream convolutional neural network

Mixed matrix membranes based on nitrogen-rich Schiff base network polymer and their CO2 separation performance

Optimization of heat storage and release cycle performance of Ca(OH)2/CaO indirect reactor

A hybrid modeling and optimization strategy for sequential simulated moving bed

Related Author

No data

Related Institution

No data

⁰