MULTI-SCALE MASS TRANSFER MODEL FOR HETEROGENEOUS GAS-SOLID TWO-PHASE FLOW

WANG Linna; LI Jinghai

您当前的位置：

首页 >

文章列表页 >

MULTI-SCALE MASS TRANSFER MODEL FOR HETEROGENEOUS GAS-SOLID TWO-PHASE FLOW

更新时间：2025-12-10

- MULTI-SCALE MASS TRANSFER MODEL FOR HETEROGENEOUS GAS-SOLID TWO-PHASE FLOW
- CIESC Journal Issue 8, (2001)
- 作者机构：
  
  中国科学院化工冶金研究所多相反应开放实验室
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：25 August 2001，
  
  Published：25 August 2001
- 稿件说明：
移动端阅览
WANG Linna, LI Jinghai. MULTI-SCALE MASS TRANSFER MODEL FOR HETEROGENEOUS GAS-SOLID TWO-PHASE FLOW[J]. CIESC Journal, 2001, (8).
DOI：

WANG Linna, LI Jinghai. MULTI-SCALE MASS TRANSFER MODEL FOR HETEROGENEOUS GAS-SOLID TWO-PHASE FLOW[J]. CIESC Journal, 2001, (8). DOI：

摘要

建立了适用于气固循环流化床的多尺度传质模型 .从过程与尺度的角度出发

将非均匀气固两相流中的传质过程分解为静态与动态的过程

并将前者分解为稀相内、密相内以及稀密相间 3个尺度下的传质 ;在用多尺度能量最小 (EMMS)模型求解已知物系性质和操作条件的非均匀气固两相流体动力学参数的基础上

借助于前人的研究结果

利用相对滑移速度、空隙率等参数求解传质系数

求得轴向的浓度场分布

并讨论非均匀两相流动结构对传质效率的影响

Abstract

By means of structure and process decomposition

this work is devoted to elucidating mass transfer process in heterogeneous flow theoretically.Mass transfer process in heterogeneous flow of gas-solid circulating fluidized bed is considered to consist of two subprocesses: static and dynamic.At the mean time

the static subprocess is decomposed to three scales: mass transfer in dilute phase; dense phase; and inter phase.Then

by virtue of EMMS model

local hydrodynamics of heterogeneous two-phase parameters are calculated from the condition of operation parameters (solids mass flux

gas velocity) and species characteristics.Mass transfer coefficient is obtained by slip velocity

voidage

ect.Based on above

axial distribution of concentration is studied.At last

effective mass transfer coefficient of circulating fluidized bed is discussed.

关键词

Keywords

references

Views

248

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

New universal corresponding state equation for correlation and extrapolation of saturated vapor-liquid density

Engineering verification and NO emission control of rare earth Y2O3-based catalytic coatings on a metal fiber surface burner

Study on the residence time distribution characteristics of the TPMS-Diamond static mixer

Thermo-gas-elastic coupling performance analysis of high-speed and high-temperature foil face seals

Zn-doped PdO/ZrO2 with rich oxygen vacancies for the synthesis of diphenyl carbonate from CO2 and phenol

Related Author

No data

Related Institution

No data

⁰