The relationship between osmotic pressure difference across the membrane and mass transfer coefficient is developed in this paper. On the basis of this relationship
a method for measuring mass transfer coefficient by using experimental data on reverse osmosis is established. Pitzers equations are used to calculate osmotic pressure differences in order to assure accuracy of results. Under the conditions of constant operating pressure and bulk flow
mass transfer coefficient is scarcely affected by membrane structure
but decreases slightly with increasing feed concentration. The solute concentration in the polarization layer is calculated by using the measured values of mass transfer coefficient. Polarization layer concentration increases with augmentation in bulk concentration. However
their difference increases with increasing bulk concentration until a maximum difference is reached
and then decreases. Mass transfer coefficient increases with higher velocity of bulk flow. If mass transfer coefficient is so large that the ratio( P wΔ πσ/k )becomes very small
Controlled synthesis of Bi2MoO6/MoO3 composite fibers via in-situ hydrothermal method and their high-efficiency photocatalytic hydrogen production performance
Construction of transition metal-based nitrogen-doped carbon and their desulfurization performance
Study on entropy wave production and dissipation in partially premixed swirl flames subject to inlet perturbations
New universal corresponding state equation for correlation and extrapolation of saturated vapor-liquid density
Research progress of ionic liquids in separation of aromatics/alkanes and olefins/alkanes