A new hydrogenation method was introduced in an adiabatic fixed-bed reactor with gas and liquid upflow cocurrently. Three reaction regimes
i.e.
liquid phase regime
mixed phase regime and gas phase regime were observed in the bed through regulating the operating conditions. Hydrogenation of benzene to cyclohexane over palladium catalyst was used as the model reaction. The effects of hydrogen flow rate
liquid flow rate
feed temperature and pressure on the flow regime were studied. For exothermic reactions
a small increase in reaction temperature can lead to a large increase in reaction rate due to Arrhenius temperature dependence of rate constant .The increased reaction rate results in more heat generation which further increases reaction temperature
this may results in reactor runaway. In this work
we propose that it is possible to obtain effective temperature control by using a fixed-bed reactor with cocurrent upflow of the reagents. The reaction heat evolved is absorbed by evaporation of the liquid phase. The experiments showed that the conversion of benzene in the reactor with this new kind of operation could reach almost 100%
and the risk due to hot spots appearance may also be avoided.
Study on performance enhancement and cold retention characteristics of solid packed bed cold energy storage
A two-stage dual-channel deep learning model for chemical fault classification
Controlled synthesis of Bi2MoO6/MoO3 composite fibers via in-situ hydrothermal method and their high-efficiency photocatalytic hydrogen production performance
Study on microwave enhanced removal performance of organic matter in coking waste salt
Analysis of flow field characteristics and mixing performance of different SK-type static mixers