Oxygen Transfer in a Large-Scale Airlift Loop Reactor with Inner Devices

吴捷; 胡维兵; 冯朴荪

您当前的位置：

首页 >

文章列表页 >

Oxygen Transfer in a Large-Scale Airlift Loop Reactor with Inner Devices

更新时间：2025-12-16

- Oxygen Transfer in a Large-Scale Airlift Loop Reactor with Inner Devices
- CIESC Journal Issue 1, (1992)
- 作者机构：
  
  大连理工大学化学工程研究所,大连理工大学化学工程研究所,大连理工大学化学工程研究所大连116012,大连116012,大连,116012
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：25 February 1992，
  
  Published：25 February 1992
- 稿件说明：
移动端阅览
吴捷, 胡维兵, 冯朴荪. Oxygen Transfer in a Large-Scale Airlift Loop Reactor with Inner Devices[J]. CIESC Journal, 1992, (1).
DOI：

吴捷, 胡维兵, 冯朴荪. Oxygen Transfer in a Large-Scale Airlift Loop Reactor with Inner Devices[J]. CIESC Journal, 1992, (1). DOI：

摘要

研究了用结构简单而实用性强的筛板及折皱丝网组件作为内件

来促进大型气升环流反应器中气泡的分散

改善气液两相的混合

从而强化氧传递过程.文中分析了筛板开孔直径与开孔率对氧传递系数的影响

比较了两种内件效果

讨论了最佳结构尺寸.针对高径比大的气升环流系统提出了测定K_La值的平推流动态模型.模型计算结果与实测数据吻合较好.

Abstract

Puttng some suitable internal devices in the risercomer of a large-scale airlift loop reactor for promoting bubbles dispersion and gas-liquid mixing could enhance the oxygen transfer. The perforated plate and corrugated screen package were mainly investigated. The influence of the hole diameter and void-age of the perforated plate on KLa was studied. The results showed that smaller hole diameter and larger voidage had higher KLa values with lower hydraulic resistance. In order to measure the KLa with the dynamic method

a plug flow model for describing the transient response of dissolved oxygen concentration in the loop system with large height and diameter ratio was proposed to yield an analytic solution. The calculated results based on the model were well in accordance with the experimental data.

关键词

Keywords

references

Views

111

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Controlled synthesis of Bi2MoO6/MoO3 composite fibers via in-situ hydrothermal method and their high-efficiency photocatalytic hydrogen production performance

Multi objective optimization of flow and heat transfer characteristics of modified manifold microchannel heat sink based on machine learning

Thermo-gas-elastic coupling performance analysis of high-speed and high-temperature foil face seals

Research on the characterization of the molecular weight and its distribution of perfluoropolyether

Study on microstructure of NaCl solution ice centrifugal separation based on Micro-CT and deep learning

Related Author

No data

Related Institution

No data

⁰