Processing and properties of flame sprayed polyamide 12/n-SiO2 coatings
|更新时间:2025-12-10
|
Processing and properties of flame sprayed polyamide 12/n-SiO2 coatings
CIESC JournalIssue 10, Pages: 2650-2655(2008)
作者机构:
1. 郑州轻工业学院河南省表界面科学重点实验室
2. 国家建筑装修材料质量监督检验中心
3. 河南大学特种功能材料省重点实验室
作者简介:
基金信息:
DOI:
CLC:
Online First:05 October 2008,
Published:05 October 2008
稿件说明:
移动端阅览
LI Yadong, QIANG Kegang, MA Yizhu, et al. Processing and properties of flame sprayed polyamide 12/n-SiO2 coatings[J]. CIESC Journal, 2008, (10): 2650-2655.
DOI:
LI Yadong, QIANG Kegang, MA Yizhu, et al. Processing and properties of flame sprayed polyamide 12/n-SiO2 coatings[J]. CIESC Journal, 2008, (10): 2650-2655.DOI:
Processing and properties of flame sprayed polyamide 12/n-SiO2 coatings
Polyamide 12 (PA12) and its composite with nanometersized silica (PA12/n-SiO2) coatings were prepared by the flame spraying processThe thermal behavior
mechanical and tribological properties of the coatings were investigated with differential scanning calorimeter (DSC)
electronic tensile testing machine and wear-test machine of MRH-3Fourier transform infrared spectroscopy (FTIR) was used to characterize polymer degradationThe FTIR analysis did not reveal the presence of any oxidation or degradation during the processingThe results showed that the addition of nano-SiO2 could increase the crystallinity
improve the mechanical properties of the coatings and reduce friction and wear of pure polyamide 12 effectivelyIn addition
the nanocomposite coating containing 1.5%(mass) nanometersized silica displayed better properties