Normal pressure sintering and high pressure sintering of superfine Al2O3 powder with high purity
|更新时间:2025-12-10
|
Normal pressure sintering and high pressure sintering of superfine Al2O3 powder with high purity
CIESC JournalIssue 11, Pages: 2932-2936(2007)
作者机构:
1. 西南科技大学材料科学与工程学院
2. 马鞍山钢铁股份有限公司技术中心
3. 四川艺精长运超硬材料有限公司
作者简介:
基金信息:
DOI:
CLC:
Online First:05 November 2007,
Published:05 November 2007
稿件说明:
移动端阅览
SUN Zhiping, TENG Yuancheng, QI Xiaomin, et al. Normal pressure sintering and high pressure sintering of superfine Al2O3 powder with high purity[J]. CIESC Journal, 2007, (11): 2932-2936.
DOI:
SUN Zhiping, TENG Yuancheng, QI Xiaomin, et al. Normal pressure sintering and high pressure sintering of superfine Al2O3 powder with high purity[J]. CIESC Journal, 2007, (11): 2932-2936.DOI:
Normal pressure sintering and high pressure sintering of superfine Al2O3 powder with high purity
Microcrystalline Al2O3 ceramic with high purity was prepared by normal pressure sintering and high pressure sintering using superfine alumina powder.The experimental results indicated that high-speed ball milling in ethanol could reduce the average size of Al2O3 particles remarkably,and increase the specific surface area and sintering activity of Al2O3 powder.Pure Al2O3 ceramic with a relative density of 98.71% was fabricated under sintering pressure of 4.5 GPa and at a temperature as low as 1230℃ in 30 min.As compared with normal pressure sintering
the sintering temperature was decreased remarkably in the high pressure sintering process,the velocity of mass transfer was increased and the sintering time was shortened.High pressure sintering could achieve the effect of fast and low-temperature sintering.Because of a relatively low sintering temperature in the high pressure sintering process,liquid phase did not exist in MgO-doped Al2O3 ceramic and MgO had no effect on densification and restraint of Al2O3 grain growth.