精密金属零件用非ODS水基清洗剂的复配

LIU Fangfang; LI Wei

您当前的位置：

首页 >

文章列表页 >

精密金属零件用非ODS水基清洗剂的复配

更新时间：2025-12-10

- 精密金属零件用非ODS水基清洗剂的复配
- CIESC Journal Issue 11, (2006)
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：25 November 2006，
  
  Published：25 November 2006
- 稿件说明：
移动端阅览
LIU Fangfang, LI Wei. 精密金属零件用非ODS水基清洗剂的复配[J]. CIESC Journal, 2006, (11).
DOI：

LIU Fangfang, LI Wei. 精密金属零件用非ODS水基清洗剂的复配[J]. CIESC Journal, 2006, (11). DOI：

摘要

通过乳化实验法测得了阳极帽冲制所用油的HLB值为14.6，依据此值和金属表面油污的性质

从尽可能多的常用表面活性剂中进行筛选，以其乳化所用油产生的乳化效率高低来进行判定，得到与冲压油乳化效果最佳的4种表面活性剂和使用最佳的浓度范围.选定表面活性剂的3个浓度，按照4因素3水平选用L9 (34)正交试验表，将各表面活性剂复配成相应的清洗剂进行清洗阳极帽的正交试验，应用综合平衡法评价试验的清洗效果来确定最优复配方案.最后，根据表面活性剂组成混合物的HLB 值等于乳化此种油所需的HLB值时乳化效果最佳原理，验证了试验结果的符合性.

Abstract

Emulsification tests show that the HLB value of press oil for anode button is 14.6.Based on the HLB value and the nature of greasy dirt on metal surface

four surfactants with the best emulsification effectiveness and the most effective concentrations were decided after selecting from as many commonly used surfactants as possible.First

four surfactants were identified.Second

these surfactants of three different concentrations were mixed according to L9(34) orthogonal test table to form corresponding detergents and tests were made with these detergents on anode button

then the best make-up of detergent was decided by the cleaning effectiveness that was evaluated with the overall balance method.Finally

the test results were verified by the principle that emulsification effectiveness is the best when the HLB value of the mixed surfactants equals the HLB value needed for emulsified oil.

关键词

Keywords

references

Views

231

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Hydrolysis reaction mechanism of CNCl on the surface of composite metal CuCr2O4

Performance of alkali metal-loaded SrMnO3 oxygen carriers in chemical looping oxidative dehydrogenation of ethylbenzene

Prediction of biomass pyrolysis product yield based on machine learning algorithms

Zn-doped PdO/ZrO2 with rich oxygen vacancies for the synthesis of diphenyl carbonate from CO2 and phenol

Multi objective optimization of flow and heat transfer characteristics of modified manifold microchannel heat sink based on machine learning

Related Author

No data

Related Institution

No data

⁰