Optimizing sink marks of ABS part with ribs by gas assisted injection

DONG Binbin; LI Qian; LIU Chuntai; SHEN Changyu

您当前的位置：

首页 >

文章列表页 >

Optimizing sink marks of ABS part with ribs by gas assisted injection

更新时间：2025-12-10

- Optimizing sink marks of ABS part with ribs by gas assisted injection
- CIESC Journal Issue 1, (2007)
- 作者机构：
  
  郑州大学橡塑模具国家工程研究中心
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：05 January 2007，
  
  Published：05 January 2007
- 稿件说明：
移动端阅览
DONG Binbin, LI Qian, LIU Chuntai, et al. Optimizing sink marks of ABS part with ribs by gas assisted injection[J]. CIESC Journal, 2007, (1).
DOI：

DONG Binbin, LI Qian, LIU Chuntai, et al. Optimizing sink marks of ABS part with ribs by gas assisted injection[J]. CIESC Journal, 2007, (1). DOI：

摘要

详细介绍了气体辅助注射成型的物理过程及其关键工艺参数对成型的影响。以带加强筋的绣花机外壳为例，考察了传统注射成型与气体辅助注射成型的优缺点。针对气体辅助注射引入的新工艺参数，介绍了一种CAE技术与统计学的Taguchi正交实验相结合的方法，设计L9(34)正交实验表在可成型范围内寻求最优工艺参数。结果表明，气体辅助技术能减少原料，对有加强筋的制件能有效地去除沉降斑、减弱不均匀收缩及减少内应力，大大改善制件的表面质量，增强制件尺寸的稳定性。

Abstract

Gas assisted injection molding (GAIM)

as an innovative molding technique

has received extensive attention in recent years.GAIM can effectively decrease sink marks and volumetric shrinkage of the part

while GAIM is inherently more complex than conventional injection molding.At the same time

it involves many additional process parameters

such as gas delay time

gas pressure and gas injection time.In this study gas channels supplant ribs were used to achieve stable and smooth surface quality.In order to find optimum process parameters of GAIM

the experimental design of the Taguchi method was used to determine the GAIM conditions

and the cases were simulated by using the integrated commercial software packages.All molding conditions and affecting factors were discussed regarding the depth of sink marks of the shell of a machine.The results showed that the gas channels supplant ribs can effectively reduce raw material consumption

eliminate sink marks

diminish differential shrinkage and residual stress

improve finish surface

and enhance stability of part dimension.

关键词

Keywords

references

Views

411

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Study on performance enhancement and cold retention characteristics of solid packed bed cold energy storage

Zn-doped PdO/ZrO2 with rich oxygen vacancies for the synthesis of diphenyl carbonate from CO2 and phenol

Study on flash evaporation characteristics as well as thermodynamic variation performance in liquid hydrogen tank during on-orbit venting

Research progress of ionic liquids in separation of aromatics/alkanes and olefins/alkanes

Heat transfer mechanisms, bottleneck identification and optimization in heat exchanger networks under variable operating conditions

Related Author

No data

Related Institution

No data

⁰