水泥回转窑内NO生成的模拟

WANG Shijie; LU Jidong; LI Weijie; REN Hebin; LI Jie; HU Zhijuan

您当前的位置：

首页 >

文章列表页 >

水泥回转窑内NO生成的模拟

更新时间：2025-12-10

- 水泥回转窑内NO生成的模拟
- CIESC Journal Issue 11, (2006)
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：25 November 2006，
  
  Published：25 November 2006
- 稿件说明：
移动端阅览
WANG Shijie, LU Jidong, LI Weijie, et al. 水泥回转窑内NO生成的模拟[J]. CIESC Journal, 2006, (11).
DOI：

WANG Shijie, LU Jidong, LI Weijie, et al. 水泥回转窑内NO生成的模拟[J]. CIESC Journal, 2006, (11). DOI：

摘要

采用气固流动、煤粉燃烧和NO生成模型，结合物料烧成过程的物理化学反应热效应的一维热流函数，对采用4通道燃烧器的某3000 t·d-1生产能力的全尺寸水泥回转窑内NO的生成进行了数值模拟研究，对水泥回转窑内NO生成机理及分布规律进行深入的分析.研究结果表明：水泥回转窑内NO生成主要为热力型NO和燃料型NO，并且以热力型NO为主要生成方式，燃料NO主要在窑头的燃烧带产生，热力NO主要产生于高温烧成带，并且燃料NO与热力NO的生成过程存在着相互抑制作用.

Abstract

Based on a set of mathematical models describing the physical and chemical processes（gas-solid flow，pulverized coal combustion，zone heat flux of clinker，and NO formation and reduction）in a cement rotary kiln，the distributions of gas temperature and gas components（O2，CO，NO）were obtained by numerical simulation of a 3000 t·d-1 full scale cement rotary kiln with four-channel burner.Besides，the mechanisms of NO formation and reduction in the cement rotary kiln were analyzed.The results indicated that the amount of NO mainly came from thermal NO and fuel NO.Thermal NO played a dominant role in the NO amount.Fuel NO was mainly formed in the combustion zone，while thermal NO was mainly formed in the high temperature sintering zone.In addition，mutual inhibition existed in the formation process of fuel NO and thermal NO.

关键词

Keywords

references

Views

829

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Progress in research of selective oxidation of low carbon polyols over nano-Au catalysts with precise electronic effect regulation

Physics-informed spatio-temporal graph convolutional network for fermentation processes

Construction of transition metal-based nitrogen-doped carbon and their desulfurization performance

Study on synergistic modification of nitrogen-doped carbon coating and Ti⁴⁺ co-doping for lithium vanadium phosphate cathode materials

Heat transfer mechanisms, bottleneck identification and optimization in heat exchanger networks under variable operating conditions

Related Author

No data

Related Institution

No data

⁰