水平管内气液两相泡状流进口段壁面切应力

SU Yuliang; ZHANG Mingyuan; HOU Hongning; YANG Jian; ZHU Xianran

您当前的位置：

首页 >

文章列表页 >

水平管内气液两相泡状流进口段壁面切应力

更新时间：2025-12-10

- 水平管内气液两相泡状流进口段壁面切应力
- CIESC Journal Issue 11, (2006)
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：25 November 2006，
  
  Published：25 November 2006
- 稿件说明：
移动端阅览
SU Yuliang, ZHANG Mingyuan, HOU Hongning, et al. 水平管内气液两相泡状流进口段壁面切应力[J]. CIESC Journal, 2006, (11).
DOI：

SU Yuliang, ZHANG Mingyuan, HOU Hongning, et al. 水平管内气液两相泡状流进口段壁面切应力[J]. CIESC Journal, 2006, (11). DOI：

摘要

利用TSI-1268W热膜探头对内径为35 mm的水平管内气液两相泡状流的壁面切应力进行了直接测量，得到了进口段不同截面上沿周向不同位置处的壁面切应力数据，通过分析实验段进口段的壁面切应力沿管长的变化来确定进口段的长度.结果表明，液相中加入气泡后增加了壁面切应力数据的离散程度.在实验参数范围内，测量的壁面切应力进口段的长度在52D～65D之间，并且壁面切应力进口段随着液流Reynolds数和截面含气率的增大而增大.液相中加入气泡后在不同的测量角度壁面切应力的变化呈现不同的特征.

Abstract

Experiments were carried out to measure the wall shear stress(WSS) of air-water bubbly flow in the entrance region in a horizontal tube I.D.35 mm with TSI-1268W hot-film probes

and the wall shear stress data at different points in different sections were obtained and used to determine the development length.It was found that the discrete degree of WSS data increased due to introducing bubbles into the liquid.The development length was 52D—65D and increased with increasing liquid Reynolds number and void fraction.Due to the asymmetric distribution of bubbles in the horizontal tube

introducing bubbles made the wall shear stress change differently at different measuring points.

关键词

Keywords

references

Views

344

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Research progress of ionic liquids in separation of aromatics/alkanes and olefins/alkanes

Thermo-gas-elastic coupling performance analysis of high-speed and high-temperature foil face seals

Performance analysis and application of thermal and humidity control system cascade driven by waste heat

Mixed matrix membranes based on nitrogen-rich Schiff base network polymer and their CO2 separation performance

Progress in research of selective oxidation of low carbon polyols over nano-Au catalysts with precise electronic effect regulation

Related Author

No data

Related Institution

No data

⁰