两种盐溶液除湿器的建模与对比

<P>YIN Yonggao; ZHANG Xiaosong; LAI Rongbing</P>

您当前的位置：

首页 >

文章列表页 >

两种盐溶液除湿器的建模与对比

更新时间：2025-12-10

- 两种盐溶液除湿器的建模与对比
- CIESC Journal Issue 12, (2006)
- 作者机构：
- 作者简介：
- 基金信息：
- DOI：
  CLC：
- Online First：25 December 2006，
  
  Published：25 December 2006
- 稿件说明：
移动端阅览
YIN Yonggao, ZHANG Xiaosong, LAI Rongbing
. 两种盐溶液除湿器的建模与对比[J]. CIESC Journal, 2006, (12).
DOI：

YIN Yonggao, ZHANG Xiaosong, LAI Rongbing
. 两种盐溶液除湿器的建模与对比[J]. CIESC Journal, 2006, (12). DOI：

摘要

描述了绝热型与内冷型两类平板溶液除湿器的结构特点，在盐溶液竖直降膜与湿空气顺流、充分发展的工况下，基于Navier-Stokes动量方程建立盐溶液与湿空气热、质传递过程耦合数学模型，以LiCl水溶液作为除湿剂，考虑气液界面处的剪切力边界条件，在恒壁温与绝热边界条件下，对两种具有相同尺寸规格的除湿器的除湿过程进行了数值模拟，得到沿高度方向上盐溶液温度、浓度和湿空气温度、含湿量的变化情况，并对两者在相同工况下进行对比，定量描述了两类除湿器在除湿性能上的差异.结果发现内冷型除湿器的出口溶液的温度更低，接近于冷却介质温度，而且处理后的湿空气的含湿量比绝热型除湿器低5.1 g·kg-1，空气的出口温度也要低近10.5℃，但除湿溶液的浓度变化很小，进、出口浓度差不到1％.

Abstract

This paper describes two configurations of liquid desiccant dehumidifiers—internally cooled and adiabatic dehumidifiers.Based on the Navier-Stokes equation，the processes of heat and mass transfers between air and liquid desiccant were modeled in vertical parallel film laminar flow.Aqueous lithium chloride was used as liquid desiccant，and the dehumidification processes were simulated on the two types of dehumidifiers with the same dimension.The parameters changes of air and liquid desiccant along the direction of plate height were obtained.A comparison between the two dehumidifiers was made under the same operation conditions.The results showed that the temperature of liquid desiccant coming from the internally cooled dehumidifier was much lower，very close to the temperature of the cooling medium，and its outlet air humidity was 5.1 g·kg-1 less than the one of the adiabatic dehumidifier，and the outlet air temperature was 10.5℃ lower.On the other hand，the concentration of the liquid desiccant changed little.The concentration difference between inlet and outlet liquid desiccant was less than 1%.

关键词

Keywords

references

Views

431

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Identification of gas-liquid two-phase flow patterns in a riser based on recursive characteristics and CNN

Thermodynamic study of germanium-impurity competitive deposition in GeCl4-MxCly-H2 system

Prediction model for COD in petrochemical wastewater influent based on temporal-spatial dual-stream convolutional neural network

Multi objective optimization of flow and heat transfer characteristics of modified manifold microchannel heat sink based on machine learning

Methods of adaptive prediction and abnormal states traceability for sulphur content in flue gas desulfurization process

Related Author

No data

Related Institution

No data

⁰